Curtis DVD1100UK user manual Audio setup menu, 1Digital Output

SYSTEM SETUP

3. Audio setup menu

3.1Digital Output

Choose preferred option for digital output base on receiver connected to player

PCM: Output PCM audio data for receiver not support Dolby and DTS decoding (mixed primary audio, secondary audio and effect audio if available in disk)

Bitstream: Output raw data for receiver support Dolby and DTS decoding (primary audio only).

Re-encoded DTS: Output DTS data format for receiver if it support DTS decoding (mixed p rimary audio, secondary audio and effect audio if available in disk)

Note: Not setting this item properly may result in noise.

Dolby Digital

DTS and DTS HD

3.2PCM Downsampling: Sets maximum sampling rate for the SPDIF digital audio output (as some SPDIF receivers do not support 192 kHz or even 96 kHz).

48 kHz: Downsample audio with sample rates over 48 kHz.

96 kHz: Downsample audio with sample rates over 96 kHz.

Off : No downsampling on SPDIF output.

3.3Dynamic Range Control: Reduces loudness difference between soft and loud parts of the audio track.

On: Enables dynamic range control for all codecs.

Follow: Enables dynamic range control for all codecs. MLP streams use the DRC level embedded in the audio stream itself.

Off: Turns off dynamic range control.

3.4BACK: Return to main setup menu.

13