INITIAL SETUP
PUTTING THE UNIT ON A PROPER PLACE
When you turn on your television set for the first time, be sure to place it on a solid stable surface.
To avoid danger, do not expose the TV to water, or a heat source
(e.g. lamp, candle, radiator).
Do not obstruct the ventilation grid
at the rear and be sure to leave sufficient gaps around the unit.
SOURCE SELECTION
1.Press the TV /AV button on the remote control.
2.Use the 
or 
button to select the options
(TV, AV1,
and select any of them using the 
button or the ENTER button.
(The screen will change to your desired source).
Note:
Before watching please make sure all necessary cables and devices are connected.
TURNING THE UNIT ON FOR THE FIRST TIME
After you have initially connected your TV antenna or cable(no set top box)
turn the television ON.
A screen will display asking you to run a Channel Auto Scan to search and receive available local digital channels.
It is here where you will select antenna options and run Channel Auto Scan.
Channels will be stored in the TV tuner.
•Press the MENU button on the remote control.
•Using the 
buttons, scroll to highlight TV mode.
•Press the 
button to highlight AIR/CABLE.
IINPUT SOURCEURCE
TV
AV1
AV2
Com ponent 1
Com ponent 2
HDMI 1
HDMI 2
HDMI 3
VGA
Please run
Channel Auto Scan
in the TV menu
12