Normalization, Sleep Timer

b) Sleep Timer

The sleep timer automatically switches the set to stand-by after the preset time has elapsed.

You can select the time from 15 to 120 minutes with 15 minutes steps.

There are two ways to set the sleep timer;

1- Select the SLEEP TIMER in the FEATURES menu. Select the desired time by using Left or Right buttons.

2- You can also use the YELLOW button on your remote control to select this function. You can increase the switch off time interval by pressing this button repeatedly.

Notes:

The last 60 seconds of the desired switch off time by counting from 59 down. When this time interval has elapsed the set will switch to STAND-BY.

To view the remaining sleep time, press YELLOW button. To cancel the sleep time select OFF in SLEEP TIMER.

c) On Timer

You can select the on time between 30 minutes to 12 hours by pressing »«/»« buttons and select the channel with Numeric and AV buttons.

If TV is at Stand-by position, you can switch it on at desired time and programme by activating the ON TIMER feature.

To cancel the on time select off in ON TIMER.

d) AVL:

TV transmitters have different sound levels. AVL (automatic volume limiting) maintains the same sound level as you switch from program to program.

From the features menu you can select AVL button by pressing »PR « button. To supply this press »«/»« button and select ON for AVL.

	FEATURES
SLEEP TIMER	OFF
ON TIMER	OFF
AVL	ON
LANGUAGE
	EXIT

You can also usethe ““ button on your remote control to select this function. Note :Only use in TV mode.

e) Language

There are many languages available for the On Screen Displays (OSD).

In the features menu select Language by Program down button.

Press the OK button to select the language list.

Press the »PR «/»PR « or »«/»« buttons to

page through all the languages and OK to select.

Normalization

•Whilst watching TV you may change the picture While restore the original picture setting press the BLUE button on the remote control.