Index Search
An index mark will be assigned at the beginning of each record- ings you make. You may skip to a specific marked point by fol- lowing the steps below.
1 | Press | ||
appears. |
| ||
2 | Enter the number of recordings you | INDEX SEARCH | |
wish to skip by pressing [PLAY] or | 03 | ||
| |||
|
| [STOP] within 30 seconds. |
|
3 | Press [F.FWD] or [REW] to start index search. If you | ||
want to go in the forward direction, press [F.FWD]. If you | |||
want to go in the reverse direction, press [REW].
•After index search, the VCR will play the tape automati- cally.
Time Search
This feature allows you to go to a specific point on a tape by entering the exact amount of time you wish to skip in order to reach the point.
1 | Press | ||
appears. | TIME SEARCH | ||
2 | Enter your desired time to skip by | 2 : 50 | |
| |||
|
| ||
pressing [PLAY] or [STOP] within 30 seconds. | |||
|
|
| |
3 | Press [F.FWD] or [REW] to start time search. If you want | ||
to go in the forward direction, press [F.FWD]. If you want | |||
to go in the reverse direction, press [REW].
•After time search, the VCR will play the tape automati- cally.
RECORDING FUNCTION
It may be unlawful to record play back copyrighted material with- out the consent of the copyright owner.
Accidental erasure prevention |
| |
To prevent accidental recording on a recorded |
| |
cassette, remove its record safety tab. To |
| |
record on it later, cover the hole with cello- | Record safety tab | |
phane tape. | ||
|
Before recording, make sure:
•The desired channel is selected by pressing [Number] on
the remote control or the [CHANNEL (
) ]. (If you con- nected the VCR to a cable box or satellite box as in "VCR to TV Connection" on page 3, select the VCR to channel
3 or 4 the same channel as the RF output channel of the VCR. Then, select the channel you want to record at the cable box or satellite box. In this case, you can ONLY record and view the SAME channel. )
•There is a tape with its safety tab into the VCR.
•The desired recording speed is selected in SP(standard play) or SLP(super long play) mode by pressing [SPEED] on the remote control.
•TV STEREO or SAP is selected.
| Tape Speed |
| Recording/Playback Time | ||
| Type of tape | T60 |
| T120 | T160 |
| SP mode | 1hour |
| 2hours | |
| SLP mode | 3hour |
| 6hour | 8hour |
Viewing and Recording the Same Program
1 Begin the recording by pressing [RECORD].
•To temporarily stop recording or resume it, press [PAUSE/STILL]. After the VCR has been in Pause mode for 5 minutes, it will stop automatically to protect the tape and the video head from damage.
2 Press [STOP] when recording is completed.
OTR (One Touch Recording)
This feature allows you to set the recording length simply by pressing [REC/OTR] on the VCR.
1 Begin OTR by pressing [REC/OTR] on the VCR repeat- edly until the desired recording length appears.
REC | OTR(0:30) | OTR(1:00) |
(Normal recording) |
|
|
OTR(8:00) |
| OTR(7:30) |
TIMER RECORDING
You may set the VCR to start recording while you are away. You can set eight programs to record on specific days, daily or week- ly within a 1 year period.
1 | Insert a tape with its safety tab into the VCR. | |
| 2 | Select main menu by pressing [MENU]. |
3 | Select "TIMER PROGRAMMING" by pressing [PLAY] or | |
[STOP]. Then, press [F.FWD]. | ||
•If you have not yet set the clock, "CLOCK SET" appears. If so, continue with the step [3] in "CLOCK SET UP" section. Then, set the timer recording.
4 Set the timer.
Set the program number (1~8) |
| PROGRAM NUMBER | 4 | |
Program number which is not set up flashes. | DATE | - |
| |
START TIME - | - - | |||
Press [PLAY] or [STOP] repeatedly for the | END TIME - | - - | ||
CHANNEL | - - |
| ||
desired program number.Then, press [F.FWD]. | REC SPEED | - - |
| |
|
|
| ||
Select once, daily or weekly recording
For once: Press [PLAY] or [STOP] to point to "ONCE".
For daily (Monday~Friday): Press [PLAY] or
[STOP] to point to "DAILY".
For weekly: Press [PLAY] or [STOP] to point to "WEEKLY".
Then, press [F.FWD].
Set the date
First, press [PLAY] or [STOP] for the month. Then, press [F.FWD]. Next, press [PLAY] or [STOP] for the day. Then, press [F.FWD].
Set the start time
First, press [PLAY] or [STOP] for the hour. Then, press [F.FWD]. Next, press [PLAY] or [STOP] for the minute. Then, press [F.FWD]. And then, press [PLAY] or [STOP] for AM or PM. Then, press [F.FWD].
Set the end time
Follow the instructions of "Set the start time" to set the end time.
Set the channel number
Press [PLAY] or [STOP] repeatedly for the desired channel number. Then, press [F.FWD].
If you connected the VCR to a cable box or satellite box as in "Connect VCR to TV" on page 3, select the VCR to channel 3 or 4 the same channel as RF output channel of the VCR.
Then, select the channel you want to record at the cable box or satellite box. Leave the cable box or satellite box on for timer recording.
Set the tape speed |
| ONE TIME PROGRAM | |||
| PROGRAM NUMBER 4 | ||||
Press [PLAY] or [STOP] repeatedly for the | |||||
DATE | 05/12 MON | ||||
START TIME 07:30 | PM | ||||
desired tape speed. | END TIME 08:30 | PM | |||
CHANNEL | 16 |
| |||
Then, press [F.FWD]. | REC SPEED SP |
| |||
| SP |
| |||
|
|
| SLP |
| |
•To go back one step, press [REW].
5 | To set another program, repeat step [4]. To exit, press |
[C.RESET/EXIT]. | |
6 | Press [POWER] to set the timer. The TIMER indicator on |
the VCR comes on. TIMER RECORDING WILL NOT BE |
ACTIVATED UNLESS YOU TURN THE VCR OFF.
– 5 – | EN |