Symphonic VR-501 Specifications, Maintenance, Servicing, Cabinet Cleaning, Auto Head Cleaning

Page 13

SPECIFICATIONS

Television system :

NTSC, TV standard

Video heads :

Rotary four-head

Tape cassette :

 

 

 

 

video cassette

 

 

 

 

Tape speed

 

 

 

 

 

Recording :

SP, SLP

Playback :

SP, LP, SLP

Tuner channel

 

 

 

 

 

VHF :

#2~#13

UHF :

#14~#69

Cable channel :

5A, A-5 ~ A-1, A ~ W+84

RF converter :

Built-in VHF converter

Converter output :

VHF Channel 3 or 4.

Timer indication :

AM/PM 12-hour system

Operating temperature :

5oC~40oC (41oF~104oF)

Terminals

 

 

 

 

 

Antenna input :

F type connector x 1

Antenna output :

F type connector x 1

Video input/output :

RCA connector x 3

Audio input/output :

RCA connector x 3

Video output level :

1Vp-p

Video output impedance : 75

Audio output level :

-6dBv (1KHz)

Video input level :

0.5~2.0Vp-p

Audio input level :

-10dBv

Power requirement :

120V, 60Hz

Power consumption :

12 Watts

Dimensions :

W

14-1/4" (360mm)

 

H

3-5/8" (92mm)

 

D

8-1/2" (215.5mm)

Weight :

5.1 lbs. (2.3 Kg.) (approx.)

Designs and specifications are subject to change without notice and without legal obligation.

If there is a discrepancy between languages, the de- fault language will be English.

MAINTENANCE

SERVICING

Should your VCR become inoperative, do not try to cor- rect the problem by yourself. There are no user-service- able parts inside. Turn off, unplug the power plug, and please call our help line at 1-800-242-7158, to locate an Authorized Service Center.

CABINET CLEANING

Wipe the front panel and other exterior surfaces of the VCR with a soft cloth immersed in lukewarm water and wrung dry.

Never use a solvent or alcohol. Do not spray insecti- cide liquid near the VCR. Such chemicals may cause damage and discoloration to the exposed surfaces.

AUTO HEAD CLEANING

Automatically cleans video heads as you insert or re- move a cassette, so you can see a clear picture.

Playback picture may become blurred or interrupted while the TV program reception is clear. Dirt accu- mulated on the video heads after long periods of use, or the usage of rental or worn tapes can cause this problem.

If a streaky or snowy picture appears during play- back, the video heads in your VCR may need to be cleaned.

1.Please visit your local Audio/Video store and pur- chase a good quality VHS Video Head Cleaner.

2.If a Video Head Cleaner does not solve the problem, please call our help line at 1-800-242-7158, to locate an Authorized Service Center.

NOTES:

Remember to read the instructions included with the video head cleaner before use.

Clean video heads only when problems occur.

- 13 -

EN

1D19

Image 13
Contents Supplied Accessories Table of ContentsRisk of Electric Shock Do not Open Do not Expose this Appliance to Rain or MoisturePrecautions Operating Controls and Functions FeaturesInstalling the Batteries ANTENNA/CABLE Connections Preparation for USESetting the CH3/CH4 Switch Initial SET UP for USEAutomatic Channel SET UP Clock SET UPChannel SET UP Again SET UP for USE AgainTo ADD/DELETE Channels Selecting the on Screen LanguageNormal Playback Playback FunctionSearch Functions Auto Repeat PlaybackViewing and Recording Same Program Recording FunctionCopying a Video Tape To Monitor the RecordingHints for Timer Recording Timer RecordingTo Stop AN Automatic Timer Program Already Started To CHECK, CORRECT, or Cancel AN Automatic Timer ProgramTroubleshooting Guide Special FeaturesAuto Rewind Real Time Tape CounterMaintenance SpecificationsCabinet Cleaning Auto Head CleaningConexiones DE ANTENA/TELEVISIÓN POR Cable Controles DE Funcionamiento Y Funciones Funai Corporation Limited Warranty