Sharp LC 13SH6U CA,c,sSTATS FE.EeC. Rt,as, @ Setting Status, Repea steps I to 4 of Setting V-CHIP

[] Activating V-CHIP BLOCK

@Setting STATUS

@@@

@@®

@®®

@®@

'1 Repea_ steps I to 4 of Setting V-CHIP

2Press A/V to select "STATUS", and press ENTER

IMPAA
:CAN,	ENGLiBH	RATIN
tTV	GUIDELINES	RAT	NeS
IICAN_TATU	SFRENCH

Press AIr to select "ON", and press ENTER

"I "STATUS _ is set to _OFF". V-CHIP BLOCK wilt not be

activated

4 Press MENU to exit

IW Canceling the V-CHIP BLOCK screen whie V- CHIP BLOCK is activated

1"V_CRIP HAS BEEN ACTIVATED _ appears if you watch a program with the same Program Rating data you configured

_v

•"V-CHIP HAS BEEN ACTIVATED"wilt net be displayed if 'STATUS" is set to "OFF

2Press MENU to display "INPUT SECRET NO"

3Input the 4-digit secret number by using Channel Select; V-CHIP BLOCK is temporarily canceled If you

:' input an incorrect secret number. "SECRET NO IS

INCORRECT" is displayed In this case, input the correct secret number

I_ Changing V_CHIP BLOCK settings

1Repeat steps 1 to 3 of Setting V-CHIP. then "INPUT SECRET NO "will be displayed

2Input the 4-digit secret number by using Channel Select; the V-CHIP select mode wilI be displayed Set the V-CHIP BLOCK again

MPAA

TV GUIDELINES

NGLISHRATINGS

CA,c,sSTATS FE._EeC. R^_t,as

I_1 Changing or clearing the SECRET NUMBER

IIyou forget the secret number, clear the secret number as fotIows

Upper conIrelpaeei of Ihe main unit

VOL (+) MENU

Repeat steps 1 to 3 of Setting V-CHIP, or I and 2 of

Canceing the V-CHIP BLOCK screen while V-CHIP BLOCK is activated, then "INPUT SECRET NO" will

be displayed

2Press and hold both CH (,",) and VOL (+) on the main

unit simultaneously until the message "INPUT SECRET NO " blinks

3Press MENU to exit