System connections (continued)
■Speaker connection
Connect the black wire to the minus
Caution:
●Use speakers with an impedance of 6 ohms or more, as lower impedance speakers can damage the unit.
●Do not mistake the right and the left channels. The right speaker is the 
one on the right side when you face 
the unit.
●Do not let the bare speaker wires
touch each other.
● Do not allow any objects to fall into or | Incorrect |
to be placed in the bass reflex ducts. |
|
●Do not stand or sit on the speakers. You may be injured.
■AC power connection
After checking all the connections have been made correctly, plug the AC power lead of this unit into the wall socket. If you plug in the unit first, the unit will enter the
Note:
Unplug the AC power lead from the wall socket if the unit will not be in use for a prolonged period of time.
Remote control
■Battery installation
1Open the battery cover.
2Insert the supplied batteries according to the direction indicated in the battery compartment.
When inserting or removing the batteries, push them towards the 
battery terminals.
3Close the cover.
■Test of the remote control
After installing the unit (see pages 8 - 9), check that the remote control operates correctly.
Point the remote control directly at the remote sensor on the unit.
The remote control can be used within the range shown below:
Press the
Remote sensor
Precautions for battery use:
●Replace all old batteries with new ones at the same time.
●Do not mix old and new batteries.
●Remove the batteries if the unit will not be used for long periods of time. This will prevent potential damage due to battery leakage.
Caution:
●Do not use rechargeable batteries
●Installing the batteries incorrectly may cause the unit to malfunction.
●Batteries (battery packed or battery installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
0.2m - 6 m (8" - 20')
ON / | OPEN / CLOSE |
1 
2 
3
4 
5 
6
7 
8 
9
DIRECT |
|
|
| 0 | 10 |
TUNING |
| TUNING |
PRESET |
| PRESET |
SETUP | OSD | FUNCTION |
EQUALIZER | VOLUME | |
MEMORY |
| MUTE |
Battery removal:
Open the battery cover and pull up the battery to take out.
Notes concerning use:
TOP MENU | MENU/PBC |
| ENTER |
UB TITLE |
|
/S DIGEST | RETURN |
●Replace the batteries if the operating distance is reduced or if the operation becomes erratic. Purchase 2 “AAA” size batteries
●Periodically clean the transmitter on the remote control and the sensor on the unit with a soft cloth.
●Exposing the sensor on the unit to strong light may interfere with operation. Change the lighting or the direction of the unit if this occurs.
●Keep the remote control away from moisture, heat, shock, and vibrations.
9