Changing the setup menu (continued)
Setup | Selectable parameters (* indicates default setting) | |||||
menu |
|
|
|
|
| |
Audio |
|
| ANALOG | DOWNMIX | LT/RT | |
|
|
|
| AUDIO |
| STEREO* |
| GENERAL AUDIO | DOLBY | VIDEO PREFERENCE | DIGITAL | DIGITAL | SPDIF OFF |
| - - AUDIO SETUP PAGE - - |
| ||||
| DIGITAL AUDIO |
|
| AUDIO | OUTPUT | SPDIF/RAW* |
| ANALOG AUDIO |
|
|
|
|
|
|
|
|
|
|
| SPDIF/PCM |
|
|
|
|
|
| |
| GO TO AUDIO SETUP PAGE |
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
| LPCM | 48K* |
|
|
|
| OUTPUT | 96K |
Dolby |
| DUAL | STEREO* |
| |
|
|
| MONO |
| |
| GENERAL AUDIO DOLBY | VIDEO PREFERENCE |
|
| |
|
|
|
|
|
|
| - - DOLBY DIGITAL SETUP - - |
|
|
| |
| DUAL MONO |
|
|
| |
| DYNAMIC |
| DYNAMIC | FULL |
|
|
|
|
| ||
|
|
| (*1) |
|
|
|
|
|
| 3/4 |
|
| GO TO DOLBY DIGITAL SETUP |
|
|
| |
|
|
|
| 1/2 |
|
|
|
|
|
| |
|
|
|
| 1/4 |
|
|
|
|
| OFF* |
|
Description
Useful whilst using HDMI cable. When playing a disc recorded with Dolby Digital or DTS, the corresponding digital signals will be output from the HDMI Output socket.
●PCM : Choose this setting if the HDMI TV cannot support Dolby Digital or DTS to avoid noise or mute from the TV.
●RAW : Choose this setting if the HDMI TV can support Dolby Digital or DTS.
Select the sampling frequency at 48 kHz/16 bit or 96 kHz/24 bit capability after you select SPDIF/ PCM at SPDIF SETUP.
Audio with fully compressed dynamic range.
Audio with partially compressed dynamic range.
Audio with uncompressed dynamic range.
Video
GENERAL AUDIO | DOLBY | VIDEO PREFERENCE |
- - VIDEO SETUP PAGE - -
VIDEO OUTPUT OFF
Resolution
COLOR SETTING
DivX VOD
HDMI Setup
GO TO VIDEO SETUP PAGE
VIDEO | SVIDEO |
OUTPUT | COMPONENTS |
(*2) | SCART* |
RESOLU- | 480I |
| ||
TION | 576I |
| ||
| 720P (50Hz)* |
| ||
| 1080I (50Hz) |
| ||
| 1080P (50Hz) | |||
| 720P (60Hz) |
| ||
| 1080I (60Hz) |
| ||
| 1080P (60Hz) | |||
COLOR | SHARP- |
|
| HIGH |
| ||||
SETTING | NESS |
|
| MEDIUM* |
|
|
|
| LOW |
| BRIGHT- |
|
| |
| NESS |
|
|
|
| CONTRAST |
|
| |
|
|
|
|
|
●SVIDEO : Choose this setting for
●COMPONENTS: Choose this setting for
COMPO- NENT output.
●SCART : Choose this setting for SCART output.
You can select HDMI resolution whilst using HDMI cable.
If you use TV without multi- system (PAL or NTSC only) whilst doing HDMI setup, select any resolution with 50 Hz only for PAL system. Whilst for TV with NTSC system, select any resolution with 60 Hz.
11