Digital Teletext (** for UK only)
•Press the “
” button.
•The digital teletext information appears.
•Operate it with the coloured buttons, cursor buttons and OK button.
The operation method may differ depending on the contents of the digital teletext.
Follow the instructions displayed on digital teletext screen.
•When Press “SELECT” button or similar message appears on the screen, press the OK button.
•When the “
” button is pressed, the TV returns to television broadcasting.
•With digital terrestrial broadcasting
•The aspect ratio (picture shape) when watching a channel with just digital teletext broadcasting is the same as the aspect ratio of the picture viewed previously.
•When you press the “
” button again, the digital teletext screen will be displayed.
Analogue Teletext
Use of teletext and its functions are identical to the analogue text system. Please do refer to the “TELETEXT” explanations.
Widescreen
Depending on the type of the broadcast being transmitted, programmes can be viewed in a number of formats. Press the “SCREEN” button repeatedly to change screen format.
When Auto is selected, the format being displayed is determined by the picture being broadcasted.
PLEASE NOTE: Menu size changes depending on the chosen image size.
Notice !
AC3 audio type is not supported. In this case, Tv sound will be muted. If the broadcast includes AC3 stream, the following warning message will be displayed on the screen:
If there is no audio available, the following warning message will be displayed on the screen:.
IDTV Menu System
Press the “M” button. Main menu will be displayed.
Channel List
Using the “
” or “
” button on the remote control, make sure that the first item, Channel List, is highlighted and press the “OK” button to display the Channel List.
Navigating the Entire Channel List
Press “
” or “
” button for selecting the previous or next channel. You can press “RED” or “GREEN” button to move page up or page down.
To watch a specific channel, highlight it using “
” or “
”button and then press “OK” button, while the “Select” item on Channel List menu is highlighted by using “
”or “
” button.
Then the name and number of the selected channel will be displayed in the
Moving the channels in the channel list
•Press “
” or “
” buttons to select the channel that will be moved.
•Press “
” or “
” buttons to select the “Move” item on Channel List menu.
Following On Screen Display (OSD) will be displayed next to “OK” item to indicate that enter a number by using the numeric buttons on the remote control and press “OK” to confirm.
English - 12 -
_10068534_50174932.indd 12 | 18.08.2010 09:13:55 |