Preferred
These settings will be used if available. Otherwise the current settings will be used.
•Audio: by pressing “
” or “
” keys change the audio language.
•Subtitle: alter the subtitle language with “
” or “ 
” keys. The chosen language will be seen in subtitles.
Movie Subtitle (optional)
•In order to display subtitles properly, use this setting to select a movie subtitle language.
•By pressing “
” or “
” button, select the desired language option.
•Guide: By pressing “
” or “
” buttons change the guide language.
Current
•Audio: if audio language is supported change the audio language by pressing “
” or “
” buttons
•Subtitle: if subtitle is backed up, alter the subtitle language with “
” or “
” buttons. The chosen language will be seen in subtitles.
Note: If the Country option is set to Denmark, Sweden, Norway or Finland, the Language Settings menu will function as described below:
Language Settings
In the configuration menu, highlight the Language Settings item by pressing “
” or “
” buttons. Press “OK” and Language Settings submenu will be displayed on the screen:
Use “
” or “
” buttons to highlight the menu item that will be adjusted and then press “
” or “
” button to set.
Notes:
•System Language determines the
•Audio Language is used for selecting the soundtrack of a channels.
•Primary settings are the first priority when multiple choices are available on a broadcast. Secondary settings are the alternatives when the first options are not available.
Installation
The Installation menu is mainly intended to help you for creating a Channel Table in the most efficient way. Select Installation from the Configuration menu by pressing “
” or “
” buttons.
This menu includes the following items:
(*) For Denmark, Sweden, Norway or Finland.
Automatic Channel Scan
Automatic channel scan is started by pressing “OK” button while Automatic channel scan item is highlighted.
The following message appears on the screen:
Highlight Yes or No by using “
” or “
” buttons and press “OK” button to confirm.
If Yes is selected, automatic search starts. Selecting No cancels automatic search.
After search is completed for digital channels, a message asking whether to search for analogue channels appears on the screen:
Press the “OK” button to search for analogue channels. The following menu appears on the screen for analogue channel search:
English - 17 -
_10068534_50174932.indd 17 | 18.08.2010 09:13:58 |