Operating the box
the ‘Version’ label under the ‘Install’ section in Menu.
2.The version number is displayed beneath the ‘Version’ label.
Ethernet
"Ethernet" allows you to set IP address manually or automatically.
When selecting the AUTO function and an Ethernet cable is not connected then, the circle marked around the icon will be in red colour. And the default value of the ethernet settings will be 0 as shown in the snapshot.
When selecting the AUTO function and an Ethernet cable is connected then, the circle marked around the icon will be in green colour. And the Ethernet settings will be configured automatically as shown in the figure below.
When the user select the MANUAL and an Ethernet cable is connected then, the circle mark around the icon will be in green colour due to successful link up. The ethernet settings need to be entered manually as in the snapshot.
24