Sharp MD-MT877H operation manual Operation, Helpful tip when attaching a label, Recording, Basic

Page 23

To prevent recorded MiniDiscs from be- ing erased accidentally

Slide the accidental erase prevention tab, located on the side of the MiniDisc, in the direction indi- cated by the arrow.

●The MiniDisc will then be protected against accidental erasure.

Helpful tip when attaching a label

When attaching a label to an MiniDisc cartridge, be sure to note the following. If the label is not attached properly, the MiniDisc may jam inside the unit and it may not be pos- sible to remove it.

●If the label peels off or partially lifts

away, replace it with a new one.

● Do not put a new label on top of an existing one.

●Attach the label only in the specified location.

Recording –

Operation

Recordable Recording prevented

To add a recording to such a MiniDisc, slide the acci- dental erase prevention tab back to its original position.

Web-site:www.sharp.co.uk/support Help Line: 08705 274277 (office hours)

Basic –

Image 23

Contents Thank you for purchasing this Sharp product Portable Minidisc Recorder ModelAccessories Contents Special Notes Special NotesImportant Introduction Introduction Storing the unit PrecautionsPrecautions Avoid using or leaving the unit in the following placesMain unit Names of Controls and IndicatorsColour LED Names of Controls and IndicatorsImportant Introduction Names of Controls and Indicators Main unit display panelRemote control display panel Remote control unitIndicators Mode Battery ChargerNames Setting ChargeFor charging How to use the Charge / Operation switchBattery RemovingCharging Using with the Rechargeable BatteryPower Source Using with the Rechargeable Battery Charge modeDisplay About the liquid crystal display LCDWith DischargedSource Using with the AC AdaptorPower Using withOpen the case cover Insert a alkaline battery into the batteryDEUTSCHAttach the battery case to the portable MD Open PressHold Function To cancel the hold modeHold Function PreparationInserting a MiniDisc Inserting a MiniDiscConnections Connections50/60Hz To the wall socket To the Optical Line in socket Digital OUTBefore Recording RecordingBasic Operation Recording +12 -12dB Press the Mode button repeatedly to se- lect recording modePress the REC button Digital recordingTo stop recording To update the recorded contents of the MiniDiscRecording To interrupt recordingBasic Helpful tip when attaching a labelOperation RecordingBefore Playing back PlaybackBasic PlaybackTo stop playback To turn off the powerTo interrupt playback Bass control Volume controlPlayback To locate the beginning of a track Useful Features Advanced PlaybackAdvanced Playback To locate the desired portionTo return to normal playback Advanced playbackIntro play To interrupt fast playback Random play or repeat playTo play at double speed Mono recording only Advanced Recording Monaural recording Useful Features Advanced RecordingLong-play recording Times and 4 times long recordingAdvanced Recording About the recording modeYou can erase a portion of a track and make a new recording To start recording from the middle of a trackPress the Edit button Useful AdvancedManual numbering Numbering restriction Automatic numbering in digital recordingAbout sampling rate converter Press the 06 button whilst recording To write recorded contents on the MiniDiscRecording from a Microphone To interrupt a recording0dB 4dB Useful Features Recording from a MicrophoneSound-actuated recording Mic Synchronised recording During a mic manual recording Features from a Microphone Track intervalsUseful Recording from a MicrophoneDuring playback, press the Disp button Useful Features Checking DisplaysChecking Displays To check the elapsed time and remaining time of the trackVidual track Checking DisplaysTo display the playing time of an indi Changing Changing Default SettingsFeatures Default SettingsAuto play Changing Default SettingsAuto power save Beep soundCreating disc and track names Titling a MiniDiscAdvanced Titling a MiniDisc Select the character to add Put the unit in the character input modeTo add characters Perform steps 1 2 onBefore stamping What is a master MiniDisc?What is a MiniDisc for stamping? Stamping titles from another MiniDiscLoad a MiniDisc for stamping Press the Enter button Operation of the MiniDisc for stampingEditing a Recorded MiniDisc Advanced FeaturesEditing a Recorded MiniDisc To erase tracks one at a timePress the Edit button repeatedly to select Combine To divide a trackTo combine tracks Press the Edit button repeatedly to select DivideTo move a track Editing a Recorded MiniDiscStereo System or a Car StereoListening through a stereo system Listening through a car stereoRechargeable battery Other Features and CautionReferences Other Features and Caution Resuming auto play MiniDisc System Limitations Symptom LimitationsReferences Error MessagesError Messages Tr. Protect No SignalTroubleshooting TroubleshootingMoisture condensation MaintenanceMaintenance If trouble occursSpecifications SpecificationsError correction DimensionsWeight Signal readoutSharp Corporation TINSE0340AWZZ

MD-MT877H specifications

The Sharp MD-MT877H is a sophisticated mini-disc player and recorder that showcases Sharp's commitment to high-quality audio technology and a compact design. This device is an advanced iteration in the mini-disc line, appealing to audiophiles and users who appreciate superior sound quality in a portable format.

One of the standout features of the MD-MT877H is its outstanding playback and recording capabilities. It supports the MiniDisc format, allowing for near-CD quality audio in a manageable size. This device is not only capable of playing pre-recorded MiniDiscs but also allows users to record their own audio, making it versatile for both personal use and professional applications. The ability to record directly from various sources, such as radios or external microphones, makes it a flexible choice for music enthusiasts and field recorders alike.

In terms of sound quality, the MD-MT877H is equipped with Sharp's advanced digital signal processing technologies, which enhance audio clarity and depth. The support for various audio formats and features like pitch control further adds to its versatility, catering to musicians who require precision in playback speed. The sophisticated anti-shock mechanism also ensures that playback remains smooth and uninterrupted, even during sudden movements.

Another important feature of the Sharp MD-MT877H is its ergonomic design. The device is lightweight and portable, making it easy to carry for on-the-go listening. The interface is user-friendly, with easy navigation through the different menus and settings, allowing users to create custom playlists and manage their recordings seamlessly. The LCD display provides clear visibility of song titles, track numbers, and recording time, ensuring users can easily keep track of their audio.

Additionally, the MD-MT877H includes a powerful built-in rechargeable battery, offering extended playback and recording times without the need for constant recharging. This convenience is complemented by various connectivity options, including headphone and line-out jacks, allowing users to connect the device to home audio systems or headphones with ease.

Overall, the Sharp MD-MT877H is an excellent choice for individuals seeking a reliable and high-performing mini-disc player and recorder. With its superb audio quality, user-friendly design, and versatile recording options, it stands out as a premier option for both casual listeners and serious audiophiles. Whether for personal enjoyment or professional use, the MD-MT877H embodies the best of what mini-disc technology has to offer.