Sharp MD-MT877H Useful, Recording from a Microphone, Features from a Microphone Track intervals

Page 38

Recording from a Microphone : continued

Features from a Microphone –

Track intervals

When recording from the microphone, track num- bers will be created automatically at regular inter- vals (default setting: approximately every 5 minutes). During a mic synchro recording, the unit pauses when a silence lasts for 3 seconds or more, and cre- ates a track number.

Changing intervals between tracks

1 When a recording is paused or whilst re- cording, press the EDIT button repeatedly.

Example: Set to “5 minutes”.

During a mic manual recording

●Timed auto marks will be created every 5 minutes.

Track	Track	Track	Track
number 1	number 2	number 3	number 4

5 minutes

5 minutes

5 minutes

During a mic synchro recording

If a silence lasts for 3 seconds or more, a timed auto mark will be created 5 minutes after the previous mark is created.

Recording

Useful

(A new track number is created every 3 minutes.)

(A new track number is created every 5 minutes.)

(No automatic track numbers are created.)

(A new track number is created every 10 minutes.)

:Track number which is created by the timed auto mark function.

:Track number which is created when a silence lasts for 3 sec- onds or more during synchro recording.

Track	Track	Track	Track	Track
number 1 number 2		number 3	number 4	number 5

–

38

●The interval between marks may vary slightly com- pared with the actual recording time.

2 Track numbers will be created automati- cally at regular intervals.

Creating track numbers manually

Press the REC button whilst recording.

2 minutes 5 minutes 1 minute 5 minutes

Web-site:www.sharp.co.uk/support Help Line: 08705 274277 (office hours)

Image 38

Contents Portable Minidisc Recorder Model Thank you for purchasing this Sharp productAccessories Contents Special Notes Special NotesImportant Introduction Introduction Avoid using or leaving the unit in the following places PrecautionsPrecautions Storing the unitNames of Controls and Indicators Main unitMain unit display panel Names of Controls and IndicatorsImportant Introduction Names of Controls and Indicators Colour LEDRemote control display panel Remote control unitIndicators Charge Battery ChargerNames Setting ModeRemoving How to use the Charge / Operation switchBattery For chargingCharge mode Using with the Rechargeable BatteryPower Source Using with the Rechargeable Battery ChargingDischarged About the liquid crystal display LCDWith DisplayUsing with Using with the AC AdaptorPower SourceOpen Press Insert a alkaline battery into the batteryDEUTSCHAttach the battery case to the portable MD Open the case coverPreparation To cancel the hold modeHold Function Hold FunctionInserting a MiniDisc Inserting a MiniDiscConnections ConnectionsDigital OUT 50/60Hz To the wall socket To the Optical Line in socketBefore Recording RecordingBasic Operation Recording Digital recording Press the Mode button repeatedly to se- lect recording modePress the REC button +12 -12dBTo interrupt recording To update the recorded contents of the MiniDiscRecording To stop recordingRecording Helpful tip when attaching a labelOperation BasicPlayback PlaybackBasic Before Playing backTo stop playback To turn off the powerTo interrupt playback Bass control Volume controlPlayback To locate the desired portion Useful Features Advanced PlaybackAdvanced Playback To locate the beginning of a trackTo return to normal playback Advanced playbackIntro play To interrupt fast playback Random play or repeat playTo play at double speed Mono recording only Advanced Recording Times and 4 times long recording Useful Features Advanced RecordingLong-play recording Monaural recordingAbout the recording mode Advanced RecordingTo start recording from the middle of a track You can erase a portion of a track and make a new recordingPress the Edit button Useful AdvancedManual numbering Numbering restriction Automatic numbering in digital recording About sampling rate converter To interrupt a recording To write recorded contents on the MiniDiscRecording from a Microphone Press the 06 button whilst recording0dB 4dB Useful Features Recording from a MicrophoneSound-actuated recording Mic Synchronised recording Recording from a Microphone Features from a Microphone Track intervalsUseful During a mic manual recordingTo check the elapsed time and remaining time of the track Useful Features Checking DisplaysChecking Displays During playback, press the Disp buttonVidual track Checking DisplaysTo display the playing time of an indi Default Settings Changing Default SettingsFeatures ChangingBeep sound Changing Default SettingsAuto power save Auto playCreating disc and track names Titling a MiniDiscAdvanced Titling a MiniDisc Perform steps 1 2 on Put the unit in the character input modeTo add characters Select the character to addStamping titles from another MiniDisc What is a master MiniDisc?What is a MiniDisc for stamping? Before stampingOperation of the MiniDisc for stamping Load a MiniDisc for stamping Press the Enter buttonTo erase tracks one at a time Advanced FeaturesEditing a Recorded MiniDisc Editing a Recorded MiniDiscPress the Edit button repeatedly to select Divide To divide a trackTo combine tracks Press the Edit button repeatedly to select CombineEditing a Recorded MiniDisc To move a trackListening through a car stereo StereoListening through a stereo system Stereo System or a CarRechargeable battery Other Features and CautionReferences Other Features and Caution Resuming auto play Symptom Limitations MiniDisc System LimitationsReferences Error MessagesError Messages No Signal Tr. ProtectTroubleshooting TroubleshootingIf trouble occurs MaintenanceMaintenance Moisture condensationSpecifications SpecificationsSignal readout DimensionsWeight Error correctionSharp Corporation TINSE0340AWZZ