Set Up (Continued)
6 Press MENU to exit.
When the BLUE SCREEN is set to ÒONÓ
No signal | Blue screen | Power turns off | |
automatically | |||
|
|
after 15 minutes
Standby mode
Note:
¥Poor reception due to weak signals, or too much noise might activate the BLUE SCREEN function despite the presence of a broadcast signal. To continue watching TV under these conditions, switch the BLUE SCREEN ÒOFFÓ.
¥While INPUT 1, 2, or 3 (COMPONENT) is selected, the BLUE SCREEN will not be shown even if BLUE SCREEN is turned on.
31
31 | 3/27/03, 11:14 AM |
Dimension: 140 X 215 mm