Sharp 54GS-61S operation manual TV Operation, Channel Selection

TV Operation

Channel Selection

Channel selector (CH /\ / CH V) buttons

Select the programme channel number you want to see, using the channel selector buttons (E/F).

As you press these buttons a list of channels appears.

Press the E/F again to select another channel.

Note: The channels that are in SKIP mode cannot be seen with this buttons. Use numerical buttons to display these channels.

Single/Double entry selector (3)

This button selects between one or two digit channel number entry.

Pr 01

➜Pr 02 Pr 03 Pr 04 Pr 05 Pr 06 Pr 07 Pr 08 Pr 09 Pr 10

PR *

Single digit entry mode

Press

3

PR * *

Double digit entry mode

0~9 Digit buttons

You can select channels by pressing the 0 ~ 9 digit buttons on the remote control.

For single and double digit entry see section B above.

Flash-back button ( )

Press this button to switch the currently viewed channel to the previously viewed channel, and vice versa. This function is only available in programme channel selection mode.

I.e. not when AV terminals are in use.

Pr 01	Press	Pr 12
Previously		Currently
viewed channel		viewed channel

Channel Call button (l)
Press the button to display the current programme number and the sound			BCC1 01
			STEREO
mode on the screen. The name if it has been set, the remaining time for off-
timer, the real-timer and the on-timer, if they have been set, is also display-
ed on the screen.
Press the button again to make the on-screen disappear.
If the channel you are viewing has been set to be skipped with the channel
skip function, the programme number is displayed in red. If the channel was
fine-tuned, programme number will be displayed in yellow.	OFF TIMER: 120 Min.
	TIMER	: 10:30
	ON TIMER : 18:00

9