Auto Installation
Auto Installation System
Your television set is provided with an Automatic Installation System which makes Installation easier.
This new system is activated when you turn on the TV for the first time.
Procedure:
1.Connect the antenna jack in the antenna input terminal on the rear side of your
2.Press the main power button (®), on the right hand side of the TV set, and the AUTO INSTALLATION message will appear on the screen.
3.Put batteries into the remote control and follow the instructions on the screen.
The TV will go through the following steps Automatically and sequentially:
Language: To select the menu language:
4.Press the RED button 
to select the language.
5.Press the BLUE button 
to continue.
Country: To select your country:
6.Press the RED button 
to select your country.
7.Press the BLUE button 
to continue and follow the instructions on the screen.
Automatic Channel Sorting System (ASS): The TV set SEARCHES FOR FREQUENCIES, memorises the channels found, and sorts them (according to technical criteria) from
Editing: When the AUTOMATIC SEARCH has been completed, the "Stored programmes" menu appears on the screen. In this menu, you can change the order of the channels and change or give the channels a
On next page is a detailed explanation of editing options about "Stored programmes" menu.
NOTE: You may not have to follow this procedure if it has already been done for you at the establishment where you purchased your TV. If this is the case go on to the section entitled "Switching ON" (page 8).
If you need to repeat the AUTO INSTALLATION, read on page 17
Power Indicator
Main power button
Power Indicator
Main power button
Language
RED | BLUE |
Contry
RED | BLUE |
Searching
Pr01
01 %
Searching,
please wait.
6