Sharp 25N M180 Activate on to Turn on V-CHIP Block, Input the Secret No. again in this case

Parent Control (V-CHIP Operation Continued)

[3] ACTIVATE ON TO TURN ON V-CHIP BLOCK

1 Press CH UP (8) or DOWN (9) to move the “ ” mark to “STATUS”, then press VOL (+) or (–)to activate ON the V-CHIP BLOCK. (If STATUS is OFF, V-CHIP BLOCK will not be operated.)

→

2 Press MENU, then “INPUT SECRET No.” will be displayed.

3 Enter the 4-digit SECRET No. using the REMOTE KEYPAD.

1 2 3

4 5 6

7 8 9

ENTER

0 100

4 Press MENU and SECRET No. is registered.

LTo cancel the V-CHIP BLOCK screen while V-CHIP BLOCK has been activated.

1 “V-CHIP HAS BEEN ACTIVATED” will be displayed if you watch the program with Program Rating data the same as you configured.

NOTE:

•“V-CHIP HAS BEEN ACTIVATED” will not be displayed if STATUS is not configured to “ON”.

2 Press MENU, then “INPUT SECRET No.” will be displayed.

3 Enter the 4-digit SECRET No. using the REMOTE KEYPAD, then V-CHIP BLOCK will temporarily be canceled. If the wrong SECRET No. is chosen, “SECRET No. IS INCORRECT” will be displayed.

Input the SECRET No. again in this case.	1	2	3
	4	5	6
	7	8	9
			ENTER
		0	100

NOTE:

•If you change Power from OFF to ON, then V-CHIP BLOCK will be activated ON again.

20

17-26/25N-M180 w/Imp. Safe 20 6/1/00, 10:02 AM