Sharp LC 10A3U operation manual Antenna Connections, Antennas

Page 10

PREPARATION (Continued)

Antenna Connections

Antennas

■The antenna requirements for good color television reception are more important than those for black & white television reception. For this reason, a good quality outdoor antenna is strongly recommended.

The following is a brief explanation of the type of connections that are provided with the various antenna systems:

F-type connector

1.A 75 ohm system is generally a round cable with F-type connector that can easily be attached to a terminal without tools (not supplied).

2.A 300 ohm system is a flat “twin-lead” cable that can be attached to a 75 ohm terminal through a 300-75 ohm ADAPTOR (not supplied).

75-ohm coaxial cable (round)

300-ohm twin-lead cable (flat)

OUTDOOR ANTENNA CONNECTION

•Use one of the following two diagrams if you connect an outdoor antenna.

A:Using a VHF/UHF combination outdoor antenna.

B:Using separate VHF and/or UHF outdoor antenna.

•Connect an outdoor antenna cable lead-in to the COAXIAL CABLE CONNECTOR on the rear of the TV set.

A. Combination VHF/UHF Antennas

VHF/UHF ANTENNA

300/75-ohm

ADAPTOR

VHF/UHF ANTENNA (Not supplied)

or	300-ohm
or	twin-lead
75-ohm
coaxial cable

Supplied antenna cable

B. Separate VHF/UHF Antenna

VHF UHF

ANTENNA ANTENNA

300-ohm twin-lead

300-ohm	COMBINER
300-ohm	(not supplied)
twin-lead

IN OUT

	or	75-ohm coaxial
	or	cable
		cable

To antenna input terminal

10

Image 10

Contents LC-10A3U LC-10A3U Important Information A. onlyContents Important Safety Precautions Dear Sharp CustomerImportant Safety Precautions Wall Mount Bracket ⋅1 Antenna Cable AC Cord Supplied AccessoriesWall Mount Bracket Screws ⋅4 Batteries for Remote Control Preparing and Using the Remote ControlPreparation Preparation Power ConnectionAntenna Connection Antenna Connections AntennasFront and Rear Control Options Main unit front viewFront and Rear Control Options Main unit rear viewRemote CONTROL/BASIC Operation Basic OperationPower TV/VIDEO Turning on PowerSwitching TV/VIDEO AV1/AV2/TV Mode Slide the Main Power switchVIDEO, FLASHBACK, Power ON/ OFF, Bright Sound VolumePower ON/OFF StandbyChannel Select Changing the ChannelsPress the button Press the 5 button Selecting a Menu Item Selecting the Menu ItemsMenu Setup EZ Setup During First Power onChmenu Adjusting the Sleep Timer Settings AdjustmentAdjusting the Language Settings LanguageAdjustment Adjusting the Video Adjust SettingsColor PictureTint Black LevelPreset screen Check the factory setting of each Adjusting the Preset SettingsPress the CH / to move Cursor to Preset Press the VOL +/- to displayEZ Setup VOL -. Search will be canceled Press VOL to cancel EZChannel Setting SetupPress VOL +/-to display CH Setting mode Setting ChannelPress the VOL +/-to display Blue Screen select mode Adjusting the Blue Screen SettingsPress VOL +/-to display Setup mode Blue ScreenExample of Application View by mounting the set to the wall using mounting bracketListening with a Headphone Fixed Screw For Set Stand Wall Mount Bracket ScrewsExample of external devices that can be connected Connecting with External DevicesVCR Connecting a VCR or home video game system AV-IN 1/2 Connecting with External DevicesAvailable product To video/audio Output terminal Outputting video and audio video output Outputs video and audioProblem Check item TroubleshootingMake sure the AC adapter is properly inserted Troubleshooting AntennaItems Model SpecificationsDimensional Drawings LC-10A3USharp Electronics Corporation LCD Television EN Color Televisor Colorido LCD