Sharp LC 10A3U operation manual Channel, Setting

1.1 Press MENU to display the MENU screen, then press CH (])/([) to move the “>” mark to “SETUP”.

ADJUSTMENT (Continued)

SETUP (Continued)

■Saving broadcast TV channels into memory.

1.1Press MENU to display the MENU screen, then press CH (])/([) to move the “>” mark to “SET UP”.

1.2Press VOL (+)/(–)to display SETUP mode, then press CH (])/ ([) to move the “>” mark to “CH SETTING”.

1.3Press VOL (+)/(–)to display CH SETTING screen.

1.4Press CH (])/([) to move the “>” mark to “CH SEARCH”, then press VOL (+)/(–)to display CH SEARCH screen.

START

2.1Press VOL (+). The tuner will search through all available chan- nels in your area and add them into the TV’s memory.

STOP

2.2Press VOL (–). CH SEARCH will stop at the current channel and will not add any higher channels.

2.3Press MENU to exit.

(CH SETTING mode)

(CH SEARCH mode)

■Adding weak or additional channels or erasing unwanted channels from TV

memory.

			1.2	Press VOL (+)/(–)to display
		VOL (+)/		SETUP mode, then press CH (])/
				([) to move the “>” mark to “CH
		(–)	1.3	SETTING”.
POWER	MENU			Press VOL (+)/(–)to display CH
CH		MENU		SETTING mode, then press CH
TV/VIDEO				(])/([) to move the “>” mark to

“CH MEMORY”.

CH (])/

		CH		([)	2.1 Press VOL (+)/(–)to display CH
			FLASHBACK
					MEMORY.
1	2	3
4	5	6	DISPLAY		2.2 Use CH (])/([) or CHANNEL
				CHANNEL
7	8	9			SELECT to select each desired
	0		MUTE	SELECT	channel to add or erase.

2.3Press VOL (+) to add a channel to the TV’s memory or press VOL (–)to erase a channel from the TV’s memory.

2.4Press MENU to exit.

Note:

(CH SETTING mode)

VOL (+)	VOL (–)
to add channel 12	to erase channel 12
to the TV memory	to the TV memory

■If you press VOL (+) again while in the CH SEARCH mode, auto-program will start again, and the previously memorized channels will be lost.

25