Using external equipment
To view external source images, select the input source from INPUT on the remote control unit or on the TV.
INPUT FLASHBACK
@0
VOL CH
FREEZEMENU
0@
_R_N
- v cRAI_PUTPOWEn
If the image does not come in clearly from the external
equipment connected to INPUT 1 or 2, you may need to change the input signal type setting on the "Input Select" menu.
PressMENUtod,sp,aytheMEN°screen,and
;i then press _/_ to select "Option".
Press ,_/Y to select "Input Select", and then press ENTER,
Press A/V to select the signal type you want to set, and then press ENTER.
-If the selected signal type is incorrect, imagesare not displayed or displayed without any color.
Press INPUT.
• A list of selectable sources appears.
INPUT1
Press INPUT again to select the input source.
•An image from the selected source automatically displays.
-Each time INPUT is pressed, the input source toggles.
-You can also select the input souree by pressing A/_'.
-if the corresponding input is not plugged in, you cannot change the input. Be sure to connect the equipment beforehand.
., See pages 14 and 15 for external equipment connection.
Press MENU to exit.
o The setting is stored and can be selected on the "INPUT SOURCE" menu.
., Refer to your external equipment operation manual for the signal type.
If you set INPUT 1 or 2 to Auto, the TV will automatically select the input signal.
Setting INPUT 1 or 2 signal selection to "Auto" when other equipment is connected will result in the following connection priority.
iNPUT 1 or 2:
COMPONENT VIDEO
VIDEO
Q- 30