Useful adjustment settings
AV MODE gives you 7 viewing options to choose from to best match the surrounding environment of the TV, which can vary due to factors like room brightness, type of program watched or the type of image input from external equipment.
FREEZEMENU
0@
@@@@
i %E
Press AV MODE.
Current AV MODE displays.
Press AV MODE again before the mode displayed on the screen disappears.
.'The mode changesas shown below.
When the input source is TV, iNPUT 1, 2 or 3 terminals
(Example)
When the input source is iNPUT 4, 5 or 6 terminals
(Example)
., You can select a different AV MODE item for each input mode. (For example, select STANDARD for TV input and DYNAMIC for INPUT 1.)
., "Enhanced Picture Contrast" technology detects the source video characteristics and smoothly adjusts the screen brightness accordingly to realize deeper black levels.
STANDARD For a highly defined image in a normal lighting
[Enhanced Picture Contrast: on]
MOVIE | For a movie |
|
|
|
|
| [Enhanced | Picture | Contrast: | offj | |
GAME | Lowers image | brightness for | easier vbwing | ||
| [Enhanced | Picture | Contrast: | offj | |
PC | For PC |
|
|
|
|
| [Enhanced | Picture | Contrast: | offj | |
USER | Allows the user to customize | settings as | |||
| desired. You (san set the mode for each | ||||
| input source. |
|
|
| |
| [Enhanced | Picture | Contrast: | offj | |
DYNAMIC | Changes the image and sound settings to | ||||
(Fixed} | the factory | preset values. No adjustments | |||
| are allowed. |
|
|
|
|
| [Enhanced | Picture | Contrast: | on] | |
DYNAMIC | For a | image emphasizing high | |||
| contrast, useful for sports viewing | ||||
| [Enhanced | Picture | Contrast: | on] |
Some input signals may have to be registered manually to display properly.
The pair of input signals (resolutions) in the list below are not distinguishable when received. In such case, you have to set the correct signal manually. After setting once, it will display when the same signal (resolution) is input again.
1024 × 768 | 136x)× 768 |
•You can only select the "input Signal" on the Setup menu when receiving one of the 2 input signals listed above.
Press MENU to display the MENU screen, and then press _/_ to select "Setup".
Press A/Y to select "Input Signal", and then press ENTER,
Press A/V to select the desired input signal on the display.
Press MENU to exit.
Q- 38