Sharp LC 20B1U operation manual Troubleshooting, Use in hot and cold rooms locations, Antenna

Page 53

TROUBLESHOOTING (Continued)

Antenna

Problem

 

Check item

 

The reception may be weak.

 

The state of the broadcast may also be bad.

The picture is

Make sure the antenna is facing the right direction.

not sharp.

Make sure the outside antenna is not disconnected.

The picture

 

 

moves.

 

 

 

Make sure the antenna is facing the right direction.

The picture is

There may be reflected electric waves from mountains or

 

buildings.

doubled or

 

 

 

tripled.

 

 

 

There may be interference from automobiles, trains, high

The picture is

 

voltage lines, neon lights, etc.

There may be interference between the antenna cable and

spotted.

 

power cable. Try positioning them further apart.

 

Is the unit receiving interference from other devices?

There are

 

Transmission antennas of radio broadcasting stations and

stripes on the

 

transmission antennas of amateur radios and cellular phones

screen or

 

may also cause interference.

colors fade.

Use the unit as far apart as possible from devices that may

 

 

cause possible interference.

Use in hot and cold rooms (locations)

When the unit is used in a low temperature rooms (location), the picture may leave trails or appear slightly delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal.

Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a heater, as this may cause the cabinet to deform and the LCD panel to malfunction.

(Storage temperature: –20°C to +60°C)

52

LC-20B1U-GBpp48-58

52

02.2.21, 4:39 PM

Image 53
Contents 20B1UCover Sharp CorporationLC-20B1U A. only Dear Sharp Customer Important Safety PrecautionsImportant Safety Precautions Service Equipment Grounding Conductors Contents Antenna Cable Supplied AccessoriesAC Adapter Cable Clamp ⋅2Preparation Using the Remote ControlBatteries for the Remote Control Antenna Connection Power ConnectionPreparation Antennas Main unit front view Main Power TV/VIDEO MenuFront and Rear Control Options Main unit rear view Front and Rear Control OptionsOn-screen display Rear terminal Listening with HeadphonesRemoving the Back Cover Basic Operation Remote ControlSwitching TV/VIDEO AV1/AV2/COMPONENT/CARD/TV Modes Turning on PowerPower Basic OperationON/OFF Standby Sound VolumePress the button Press the 5 button Changing the ChannelsSelecting Menu Items Selecting Menu ItemsEnter MenuAdjusting the Sleep Timer Settings AdjustmentPress Enter to display the Sleep Timer screen, and press SleepYou can set the brightness of the screen AdjustmentAdjusting the Brightness Settings Enter Menu Adjusting the Language SettingsPress / to move the cursor to the desired item, and press Adjusting the Video Adjust SettingsPress / to change the setting Decrease contrast Increase contrast Selected item PressToward purple Toward green Lower color intensity Higher color intensityPRESET, and press Enter Adjusting the Preset SettingsABC Press Menu to display the MenuChannel Setting SET UPSaving broadcast TV channels in the memory SET UPYour area and add them to the TV’s memory Through all available channelsBlue Screen Adjusting the Blue Screen SettingsMode or DATA, and press Enter Adjusting the Closed Caption SettingsSetting Closed Caption Chip Adjusting the V-CHIP SettingsMpaa Rating Mpaa Rating examplesTV Parental Guidelines examples TV Parental GuidelinesPress Menu to display the Menu screen Setting V-CHIP Mpaa RatingPress / to move the cursor To V-CHIP BLOCK, and pressTV Guidelines Setting MpaaRating Setting Block ContentRepeat steps 1 to 3 of 1 Mpaa Activate on to Turn on V-CHIP Block Repeat steps 1 to 3 of 1 Mpaa RATING, or 1 to 2 Changing the V-CHIP Block SettingsChanging or Clearing the Secret Number Memory Cards Memory Card PlaybackStoring data Precautions on HandlingMemory Card Playback Pull out the card and lower the lever PreparationPulling out the memory card Power Card Turning on Card ModeTV/VIDEO May result in loss of data recorded on the memory cardPress Card to switch to Slide Show playback mode Selecting the Playback ModeNDE Mode Index playback modeForwarding ReverseSelecting Card Setting Items Card AdjustmentPress / to select the desired setting item, and press Enter Pages 44Adjusting the Slide Show Settings Card AdjustmentPress / to move the cursor to Slide Show SETTING, and press Normal Random MY ProgramRegistering MY Program Images Adjusting the MY Program SettingsErasing the MY Program Settings Selecting a file Adjusting the Rotate SettingsRotating Images Component AV2 Adjusting the Sound SettingsNo sound TV AV1 Example of external devices that can be connected Connecting with External Devices VCR Connecting with External DevicesOutputting video and audio video output How to fix the cablesProblem Check item TroubleshootingPower outlet Make sure the AC adapter is properly insertedAntenna TroubleshootingUse in hot and cold rooms locations Card Items Model LC-20B1U SpecificationsUnit inch/mm Dimensional DrawingsWhere to Obtain Service What to do to Obtain Service Calling for ServiceLimited Warranty LC-20B1U-GBpp48-58 02.2.21, 439 PM