Sharp LC-C6577UM, LC-C6077UN operation manual Experiencing HD images, Using the Remote Control Unit

QUICK REFERENCE

QUICK INSTALLATION TIPS

1Attach your antenna to the back of the television. (See page 8.)

2Connect the AC plug for the television into the AC outlet.

LC-C6077UN LC-C6577UM

(2-prong) (3-prong)

AC outlet

•Place the TV close to the AC outlet, and keep the power plug within reach.

•This product must only be connected to a 120 V, 60 Hz, grounded (3-prong) outlet.

Connecting it to any other kind of outlet will damage the product and invalidate the warranty. (LC-C6577UM only)

•TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES WITH THE AC CORD CONNECTED.

3Bundle the cords properly with the cable clamp.

4How to turn on the television for the fi rst time.

A)Press POWER on the television.

POWER

B)The POWER indicator on the front of the television lights GREEN.

POWER indicator

•Speakers cannot be detached from the TV.

•TV angle cannot be adjusted.

Experiencing HD images

To enjoy HD images on the TV, prepare the following:

•Over-the-air broadcasting via HD quality antenna

•HD cable/satellite subscription

•HD compatible external equipment

•For information on updating to HD programming, ask your cable/satellite service provider.

Using the Remote Control Unit

Use the remote control unit by pointing it towards the remote control sensor on the TV. Objects between the remote control unit and the remote control sensor may prevent proper operation.

17´ (5 m)	30º
	Remote control sensor
30º	30º
	30º

■Cautions regarding the remote control unit

•Do not expose the remote control unit to shock. In addition, do not expose the remote control unit to liquids, and do not place in an area with high humidity.

•Do not install or place the remote control unit under direct sunlight. The heat may cause deformation of the remote control unit.

•The remote control unit may not work properly if the remote control sensor on the TV is under direct sunlight or strong lighting. In such cases, change the angle of the lighting

or the TV, or operate the remote control unit closer to the remote control sensor.

IMPORTANT:

The POWER indicator on the television should light GREEN indicating you have power to the television.

If the POWER indicator on the television still does not light up, press POWER on the remote control to turn the power on.

IMPORTANT:

IF THE UNIT DOES NOT POWER ON - UNPLUG THE TELEVISION FROM THE OUTLET AND REPEAT THE INSTALLATION STEPS.

IF YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT US AT 1-800-BE-SHARP.

7