No Operation Off | CH Setup |
When set to "Enable", the power will automatically shut down if there is no operation for 3 hours.
If initial setup does not memorize all the channels in your region, follow the instructions below to manually memorize the channels.
•When it is 5 minutes before the power shuts down, the remaining time will start to keep appearing every minute.
•"Disable" is the factory preset value.
Setup Menu
EZ Setup
You can run EZ Setup again, even after setting up the preset channels.
Language: Select from among 3 languages (English, French and Spanish).
TV Location: Select "Home" or "Store" for the location where you plan to install the TV. This product qualifi es for ENERGY STAR V3.0 in Home mode default setting.
Home: “Power Saving” is set to "Advanced", and AV MODE is set to "STANDARD".
Store: “Power Saving” is set to "Off" and AV MODE is set to "DYNAMIC (Fixed)". Picture Reset and Feature Demo can be set.
Picture Reset: AV MODE will be set to "DYNAMIC (Fixed)" regardless of whether Picture Reset is "On" or "Off". If you select "On", AV MODE will be reset to "DYNAMIC (Fixed)" if there is no operation for 30 minutes. When "Off" is selected, AV MODE will be set to "DYNAMIC (Fixed)".
Feature Demo: When “On” is selected, after all the settings are completed, the Feature Demo screen is displayed if there is no operation for several minutes.
•ENERGY STAR qualifi cation is based on AV MODE "STANDARD".
Air/Cable: Make sure what kind of connection is made with your TV when selecting "Air" or "Cable".
CH Search: Channel auto search makes the TV look for all channels viewable in the set area.
Air/Cable: Make sure what kind of connection is made with your TV when selecting "Air" or "Cable".
CH Search: Channel auto search makes the TV look for all channels viewable in the set area.
CH Memory: You can select the channels to skip in each ANALOG (Air), ANALOG (Cable), DIGITAL (Air) and DIGITAL (Cable).
On: Skips channels. (Channel selection disabled using CH r/s.)
Off: Does not skip channels. (Channel selection enabled using CHr/s.)
Remove Scrambled CH: This function makes the TV look for and then delete digital cable channels that are scrambled and so unavailable in the set area. The process may take more than 20 minutes.
Yes: Starts to remove scrambled channels.
No: This function does not work.
•See "Initial Setup" on page 11 for setting each item.
•If no channel is found, confi rm the type of connection made with your TV and try channel search again.
•If you select "Analog Search Start" and initiate the channel search, the CH Memory for Cable Digital will be deleted.
Antenna Setup-DIGITAL
In order to receive digital air broadcasts, you need a digital broadcast antenna. You can confi rm the antenna confi guration through the "Antenna Setup- DIGITAL" screen. If necessary, adjust the direction of the antenna to obtain the maximum signal strength.
Signal Strength: The signal strength of DIGITAL channel is displayed. The signal information is based on the current channel.
•See "Initial Setup" on page 11 for setting each item.
•If no channel is found, confi rm the type of connection made with your TV and try "EZ Setup" again.
•If you select "Analog Search Start" and initiate the channel search, the CH Memory for Cable Digital will be deleted.
Channel Strength: Input the
• This function is available for DIGITAL (Air) only.
Input Skip
This setting allows you to skip the HDMI or
Yes: Skips the input.
No: Does not skip input.
Input Label
Lets you set the input terminal displayed when using the INPUT SOURCE menu or channel display. Press a/b/c/d to select the new name for the input mode.
• You cannot change labels if the INPUT SOURCE is TV.
19