Setting the TV on the Wall, Optional Accessory

QUICK REFERENCE

Setting the TV on the Wall

CAUTION

•This TV should be mounted on the wall only with the wall mount bracket AN-52AG4 (SHARP). The use of other wall mount brackets may result in an unstable installation and may cause serious injuries.

•Installing the TV requires special skill that should only be performed by qualiﬁed service personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting that results in accident or injury.

Using an optional bracket to mount the TV

•You can ask a qualiﬁ ed service professional about using an optional AN-52AG4 bracket to mount the TV to the wall.

•Carefully read the instructions that come with the bracket before beginning work.

Hanging on the wall

AN-52AG4 wall mount bracket.

(See the bracket instructions for details.)

Vertical mounting

Angular mounting

•Due to the terminal conﬁguration on this TV, when you wall-mount this model, make sure there is enough space between the wall and the TV for the cables.

•To use this TV mounted on a wall, remove the AC cord holder on the rear of the TV, and then use the screws supplied with the wall mount bracket to secure the bracket to the rear of the TV.

Optional Accessory

The listed optional accessory is available for the Liquid Crystal Television. Please purchase them at your nearest shop.

•Additional optional accessories may be available in the near future. When purchasing, please read the newest catalogue for compatibility and check the availability.

	Part name	Model number
	Wall mount	AN-52AG4
	bracket	AN-52AG4
	bracket

About setting the TV angle

AN-52AG4

5°

LC-70LE550U

•The center of the display: 25/64 inch (10 mm) above the “c” position.

LC-60LE550U

•The “e” position is at the center of the display.

•Refer to the operation manual of AN-52AG4 for details.

LC-70_60LE550U_E_01.indd 8

2012/12/12 13:48:56