QUICK REFERENCE
QUICK INSTALLATION TIPS
1Attach your antenna to the back of the television. (See page 10.)
2Connect the AC plug for the television into the AC outlet.
1 1 2
AC outlet
•Place the TV close to the AC outlet, and keep the power plug within reach.
•TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH
3When turning on the TV for the fi rst time, press POWER on the television.
POWER 
4Insert the batteries into the remote control unit. (See page 10.)
•Speakers cannot be detached from the TV.
•TV angle cannot be adjusted.
Experiencing HD images
An HDTV without an HD source is just an ordinary TV. To enjoy HD images on the TV, you should get HD programming from the following:
•
•HD cable/satellite subscription
•HD compatible external equipment
•For information on updating to HD programming, ask your cable/satellite service provider.
Using the Remote Control Unit
Use the remote control unit by pointing it towards the remote control sensor on the TV. Objects between the remote control unit and the remote control sensor may prevent proper operation.
Remote control sensor
30°
17´ (5 m)
30°
30°
30°*
* The angle is 8º when the stand is attached.
■Cautions regarding the remote control unit
•Do not expose the remote control unit to shock. In addition, do not expose the remote control unit to liquids, and do not place in an area with high humidity.
•Do not install or place the remote control unit under direct sunlight. The heat may cause deformation of the remote control unit.
•The remote control unit may not work properly if the remote control sensor on the TV is under direct sunlight or strong lighting. In such cases, change the angle of the lighting
or the TV, or operate the remote control unit closer to the remote control sensor.
IMPORTANT:
IF THE UNIT DOES NOT POWER ON - UNPLUG THE TELEVISION FROM THE OUTLET AND REPEAT THE INSTALLATION STEPS.
IF YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT US AT
9
2012/11/15 10:57:26 |