Part names
Remote control unit
10
1 | 11 |
| 12 |
2 | 13 |
| |
3 | 14 |
| |
| 15 |
4 | 16 |
5 | 17 |
6 | 18 |
| 19 |
7 | 20 |
8
21
9
NOTE
•When using the remote control unit, point it at the TV. (See page 8.)
There is a protective film covering the face of the remote control. Please remove this film before use.
1POWER: Switch the power on or enters standby mode. (See page 14.)
2
3• (DOT): (See page 14.)
4FREEZE: Set the still image. Press again to return to normal screen.
•The still image automatically goes out after 30 minutes.
5SLEEP: Allows you to set a time when the TV automatically switches to standby. Each time you press this button, the remaining time setting switches by 10 minutes up to 2 hours. This display will disappear after a few seconds, and the sleep timer automatically starts counting down.
•If you want to adjust the sleep timer again, you can press this button repeatedly then change the time setting.
•Select “Off” by pressing SLEEP repeatedly to cancel the sleep timer.
•The TV will enter the standby mode when the remaining time reaches zero.
6EXIT: Turn off the menu screen.
7CC: Display captions during
8AUDIO: Display the MTS setting menu. (See page 15.)
9FAVORITE CH
A, B, C, D: Select 4 preset favorite channels in 4 different categories. (See page 17 for details.)
While watching, you can toggle the selected channels by pressing A, B, C and D.
10DISPLAY: Display the current channel (or input source) information on the screen. (See page 15.)
11INPUT: Select a TV input source. (See page 13.)
12MUTE: Mute the sound. “Mute” will be displayed on the screen, and the sound is silenced. The muting feature can be released by pressing this button again or one of the VOL +/– buttons.
•Sound via the COAXIAL DIGITAL AUDIO OUTPUT terminal is not muted.
13VOL
•To increase the volume, press VOL+.
•To decrease the volume, press
•VOL+/– on the TV operates the same as VOL+/– on the remote control unit.
14CH 
/
: Select the channel. (See page 14.)
15ENT: Jumps to a channel after selecting with the
16FLASHBACK: Press to switch to the previously tuned channel. Press again to switch back to the currently tuned channel.
•This function will not work if no channel has been changed after the TV is turned on.
17MENU: Display the menu screen.
18▲/▼/◀/▶/ENTER: Select a desired item on the screen.
19RETURN: Return to the previous menu screen.
20VIEW MODE: Select the screen size. (See page 16.)
21AV MODE: Select an adjusted picture setting. (Sports, Standard, Movie, Memory.) (See page 23.)
11