Supplied Accessories
Make sure the following accessories are provided with the product.
Remote control unit | “AAA” size battery | Stand unit | Operation manual | Connection guide |
(g1) Page 9 | (g2) Page 10 | (g1) Page 8 | (g1) | (g1) |
• Always use the AC cord supplied with the TV.
• The illustrations above are for explanation purposes and may vary slightly from the actual accessories.
QUICK REFERENCE
Attaching the Stand
•Before attaching (or detaching) the stand, unplug the AC cord.
•Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.
CAUTION
•Attach the stand in the correct direction.
•Do not remove the stand from the TV unless using an optional wall mount bracket to mount it.
•Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
1Confi rm that there are 12 screws (8 long screws and 4 short screws) supplied with the stand unit.
21 Set the post for the stand unit onto the box.
2 Attach the base to the post.
3 Insert and tighten the 8 screws into the 8 holes on the bottom of the base.
•Hold the stand unit securely with one hand, and then tighten the screws.
4Insert and tighten the 4 screws into the 4 holes on the rear of the TV.
Short screws
2
Long screws
2
1
1
1
FRONT
3Insert the stand into the openings on the rear of the TV.
•that the stand is fi rmly inserted into the TV.
may result in tilting of the TV set.
Soft cushion
•To detach the stand, perform the steps in reverse order.
•In the installation procedure, be careful not to catch your fi ngers between the TV set and the fl oor.
8