Sharp LC-70UHD80R, LC-60UHD80R operation manual 3D glasses

Page 5

Introduction

Caring for the front panel

Turn off the main power and unplug the AC cord from the wall outlet before handling.

Gently wipe the surface of the front panel with a soft cloth (cotton, flannel, etc.). To protect the front panel, do not use a dirty cloth, liquid cleaners, or a chemical cloth (wet/dry sheet type cloth, etc.). This may damage the surface of the front panel.

Wiping with a hard cloth or using strong force may scratch the surface of the front panel.

Use a soft damp cloth to gently wipe the front panel when it is really dirty (It may scratch the surface of the front panel when wiped strongly).

If the front panel is dusty, use an anti-static brush, which is commercially available, to clean it.

WARNING

To prevent the spread of fire, keep candles or other open flames away from this product at all times.

3D glasses

Prevention of accidental ingestion

Keep the accessory out of the reach of small children. Small children can accidentally swallow these parts.

If a child accidentally swallows any of these parts, seek immediate medical attention.

Do not disassemble

Do not disassemble or modify the 3D glasses except when recycling the batteries. Do not modify the 3D glasses.

Caution for lithium battery

Batteries must not be exposed to excessive heat such as direct sunlight or fire.

Replace only with the same or equivalent type of battery. The battery may explode if improperly replaced.

Take care not to reverse the battery poles (+ and –) when loading the battery. Follow the correct procedure when loading the battery. Loading the battery incorrectly may damage the battery or cause it to leak battery fluid, which could result in a fire, injury or damage.

Handling the 3D glasses

Do not drop, exert pressure on, or step on the 3D glasses. Doing so may damage the glass section, which may result in injury.

Be careful not to trap your finger in the hinge section of the 3D glasses. Doing so may result in injury.

Pay special attention when children are using this product.

Using the 3D glasses

The 3D glasses vision should be limited. Security advisory establishes a maximum of 3 hours visualization, and in any case no more than one show length, break included.

Use the 3D glasses only for the specified purpose.

Do not move around while wearing the 3D glasses. The surrounding area appears dark, which may result in falling or other accidents that may cause injury.

Caring for the 3D glasses

Use only the cloth provided with the 3D glasses to clean the lenses. Remove dust and soil from the cloth. Any dust or other soiling on the cloth may result in scratches. Do not use solvents such as benzene or thinners as doing so may damage the coating.

When cleaning the 3D glasses, take care not to allow water or other fluids to come into contact with the glasses.

Always store the 3D glasses in the case provided when not in use.

When storing the 3D glasses, avoid very humid or hot locations.

Viewing 3D images

If you experience dizziness, nausea, or other discomfort while viewing 3D images, discontinue use and rest your eyes.

Do not use the 3D glasses if they are cracked or broken.

3

Image 5
Contents LC-70UHD80R LC-60UHD80R CE Statement Dear Sharp customer ContentsIntroduction Caring for the cabinet Important safety precautionsPrecautions when transporting the TV 3D glasses Angle of the remote control unit Using the remote control unit Inserting the batteriesClose the battery cover PreparationAStandby/ON Menu Menu Part names and functionsTV front/side view TV rear view Remote control unit Quick guide Preparation Connecting the TV Preparation Setting the TVOperation overview Start searching channelsDaily operation Advanced featuresEnjoy additional features Go to TV Menu Setup Option CI setting CI menu Recording CAM PIN settingInserting the CA card into the CI module CI plus 1.3 Standard1Display the Home screen Using the Home screen2Select an item 3Exit the Home screenUsing Software keyboard Using the Menu screenDisplay the Menu screen Selecting in the MenuConfirm the following before turning on the power Initial auto installationInitial auto installation Analogue broadcast setting Digital broadcast settingSearching for terrestrial broadcasts Searching for cable broadcastsSearching for satellite broadcasts Single satellite setting Search startChannel strength DVB-T/T2/C/S/S2 Checking signal strengthChecking channel strength Channel strength of DVB-S/S2Watching TV Standby modeSelecting an external video source Changing channelsChannel display Selecting a sound modeHow to add / remove / move your favourite channels Before installationFavourite Channel Information Operator profileDisplay range setup Useful settings for using EPGGenre icon setup Genre icon listSelecting a programme using EPG Cancelling the timer setup Timer setup using EPGCancelling using B button on the remote control unit Important informationButtons for teletext operations TeletextTurning teletext on/off Using data service When Data service setting is set to OnMHEG-5 application UK only HbbTV applicationBefore connecting Connecting external devicesIntroduction to connections Connection method for other devicesVideo connections Hdmi connection When using the Hdmi 3 terminalDVD player/recorder Scart cable commercially available Scart connectionPB PR Component connection After connecting Connecting an amplifier with digital/analogue audio inputsDigital audio output setting Video connectionWhat is Aquos LINK? Controlling Hdmi devices usingRegarding Select recording device What you can do with Aquos LinkAquos BD player/AQUOS recorder Aquos Link connectionAquos Link menu Aquos Link setup Basic operationOperating an Aquos Link device Sound mode change Setup menuTop menu/title list Media changeAuto Power On Using a Smartphone with the TVOperation Using the Remote Control Auto Input SelectionPicture settings Basic adjustmentAV mode THX Room Mode SettingAdvanced Picture adjustmentsFilm mode Gamma adjustmentActive contrast Range of OPCAdaptive volume Audio settingsAudio adjustment Audio description settingNo signal off Power save settingsSleep timer ECO picture controlDigital setting View settingsAuto installation Programme setupButtons for Manual adjust operation Satellite settingFavourite network selection CableErase programme Analogue settingSort Individual setting Clock Individual setting PINClock setup When selecting YesDigital audio language Individual setting LanguageSubtitle LanguageWide mode Optional features settingsAuto wide only DTV/SAT mode Mode only DTV/SAT modeDigital audio output Terminal settingAudio select Input skipAdjusting image position Headphone out settingColour system Programme title displayWallpaper setting Additional featuresBoot picture IlluminationBluetooth devices BluetoothGame play time Key lockPIN Code mode Using the Miracast devicePush Button mode Connecting a USB HDD Other useful featuresDisconnecting the USB HDD USB-recordingRemote control unit Control panel Buttons Description How to operate USB-recordingButtons for USB-recording operation REC EUSB-recording playback USB-recording timer settingTimer list Time shift playback Jump time settingAuto input selection Device registrationSD/USB media/Home network Photo modeSlide show Selecting the picture size for photo modeSelecting the BGM 3D mode Music modeVideo mode Selecting the picture size for video mode DivX setupUSB device compatibility Home network server compatibilityConnecting a PC Connecting a PCDisplaying a PC image on the TV Selecting the picture size Analogue connection Hdmi connectionAdjusting the PC image manually Adjusting the PC image automaticallyAuto sync Fine syncResolution Horizontal Vertical Analogue Digital PC compatibility chartVesa Frequency SubPC control of the TV Command list Connecting to the network Network setupWired connection overview How to connectWireless installation Wireless connection overviewNet TV What is Net TV?Operations in Net TV Basic operation Inputting textsEnjoying 3D image viewing Before using the 3D glassesPart Names Preparing for the 3D glasses Supplied accessoriesUsage Range of the 3D Glasses Using the 3D glasses Before using the 3D GlassesUsing the 3D glasses 1Use the tip of a ballpoint pen or similar object Replacing the BatteryReplace the battery 3D glasses lenses 2D mode Using the 3DWithout Using the 3D Glasses Display format for 3D and 2D imagesReceiving a 3D image signal that Switching 3D to 2D modeViewing 3D images Can be detected automaticallyConfiguring the TV settings to enhance 3D image viewing Switching to the previous mode3D picture adjustments Watching 2D images in 3D3D setup Troubleshooting 3D Images Specifications 3D glassesAppendix TroubleshootingReset Reset the PINGetting update information Download setupUpdating your TV via DVB-T/T2/ C/S/S2 Picture / Audio testReceiver report Software updateIdentification Information on the software licence for this productTrademarks Disclaimers Model SpecificationsLC-70UHD80R LC-60UHD80RSpecifications Bluetooth Specifications Wireless LANMounting the TV on a wall Environmental specificationsWall mount audio setup Abbreviation list Rating table for child lockLC-60UHD80R LC-70UHD80R Dimensional drawings255 EU Energy Label for Televisions14P09-PL-NE

LC-70UHD80R, LC-60UHD80R specifications

The Sharp LC-70UHD80R and LC-60UHD80R are high-definition 4K televisions that exemplify advanced technology, offering exceptional picture quality and immersive viewing experiences. Both models are designed to meet the demands of modern consumers who seek stunning visuals and smart functionality in their entertainment systems.

The LC-70UHD80R features a large 70-inch display, while the LC-60UHD80R offers a slightly smaller 60-inch screen, catering to varying room sizes and preferences. Both televisions boast a 4K Ultra HD resolution of 3840 x 2160 pixels, which ensures that viewers experience breathtaking clarity and detail, whether they are watching movies, playing video games, or streaming online content.

One of the standout features of these models is their incorporation of HDR (High Dynamic Range) technology, which enhances contrast and color accuracy. This results in deeper blacks and brighter whites, allowing users to appreciate a wider range of colors. Additionally, Sharp’s proprietary Revelation 4K upscaling technology significantly improves the quality of lower-resolution content, providing an elevated viewing experience for all types of media.

The LC-70UHD80R and LC-60UHD80R also come equipped with Smart TV capabilities. This feature allows users to access a variety of streaming services, browse the internet, and enjoy an array of apps directly from their television. The intuitive interface makes navigation easy, ensuring a seamless experience for all users.

Another noteworthy characteristic of these televisions is their audio technology. Both models include powerful audio features designed to enhance sound quality, making dialogues clearer and soundtracks richer. The built-in speakers deliver impressive sound, though users can further enrich their experience by connecting external sound systems via HDMI ARC or optical outputs.

Connectivity options on both models are ample, including multiple HDMI and USB ports, making it easy to connect gaming consoles, Blu-ray players, and other devices. This versatility ensures that users can create a comprehensive entertainment setup tailored to their needs.

In summary, the Sharp LC-70UHD80R and LC-60UHD80R are remarkable televisions that combine stunning 4K resolution, HDR technology, Smart TV capabilities, and robust audio performance. These features collectively make them a great addition to any home theater setup, catering to the diverse entertainment needs of modern consumers. With their impressive specifications and user-friendly technologies, these models stand out in the competitive television market.