Sharp LC-70UHD80R, LC-60UHD80R operation manual 3D setup

Enjoying 3D image viewing

3D setup					NOTE
			3D depth control
					• This function is only available when converting 2D
E Basic operation		Select the method for adjusting the 3D image effect			images to 3D images.
					• When you use this function, image conversion on the TV
Go to “TV Menu” > “Setup” > “Option” > “3D		(depth).			will result in some differences in the original images and
setup” > select the menu you want to set.				Item	how they appear.
			Auto	Adjusts the still image effect (depth)	• 2D images that have been converted to 3D images may
					be viewed only for personal use.
3D auto change				automatically.
This function allows the TV to switch to 3D mode			Manual	For manual adjustment of the still	Viewing time info
				image effect (depth).
automatically when a 3D identification signal is
					This function allows you to display the elapsed time
detected.		NOTE
					of 3D image viewing on the screen.
	Item	• If you select “Manual”, adjust the 3D still image effect
						Item
			(depth) with “Depth change”.
	When a 3D signal is detected, the TV
Mode1		• This function can be adjusted when viewing 3D still				The elapsed time is displayed in
	switches to 3D mode automatically.
			images in USB media mode.		Yes	one-hour increments after you start
	When a 3D signal is detected, the TV
Mode2		• Even if you select “Auto”, the 3D still image effect				watching 3D images.
	performs the 3D image detection in		(depth) may not be correctly adjusted depending on the
					No	Hide the time.
	addition to “Mode 1”.		3D still image.
Off	Automatic change is not performed.	• 3D still images taken in macro mode will be displayed
					3D test
			with excessive depth.
NOTE		• If you experience discomfort while viewing 3D images,			This function displays 3D images for testing the 3D
			immediately discontinue viewing.
• 3D signals may not be detected depending on the signal					operation. Clicking “Start” on the screen plays back
format.
			Depth change		3D test images.
		You can adjust the 3D still image effect (depth).			NOTE
					• If you press >during playback, the previous screen
		Adjust the level from _10 to e10. “0” is the level
					will be displayed.

where no adjustment is made (factory preset value).

NOTE

•This function can be adjusted when viewing 3D still images in USB media mode.

•If you experience discomfort while viewing 3D images, immediately discontinue viewing.

2D s3D convert effect

You can adjust the 3D effect when converting images from 2D mode to 3D mode. Select a desired level of convert effect from e1 to e16.

3D glasses control

To enable this function, set the location of the TV to “STORE” (Page 12).

	Item
On	Switch on signals to the 3D glasses.
	When watching 3D images, switch this
	setting to “On”.
	Switch off signals to the 3D glasses.
Off	This will stop the TV from influencing
	3D glasses that may be in that area of
	the store.

73