Sharp LC-40LE830U LC-46LE830U/LC-52LE830U, Insert the stand into the openings on the rear

QUICK REFERENCE

■LC-46LE830U/LC-52LE830U

1Confi rm that there are 9 screws (4 long screws, 4 middle screws and 1 short screw) supplied with the stand unit.

2 Attach the supporting post for the stand unit onto the base as shown below.

• The supporting post attaches to the base at an off- centered location on the base. Be sure to attach the supporting post in the direction indicated below and attach the stand to the TV with the wider side of the

base facing forward.

2

Long screws

Forward 1

3Insert the stand into the openings on the rear of the

TV.

Soft cushion

■LC-60LE830U

1Confi rm that there are 10 screws (4 long screws, 4 middle screws and 2 short screws) supplied with the stand unit.

2Attach the supporting post for the stand unit onto the base as shown below.

•The supporting post attaches to the base at an off- centered location on the base. Be sure to attach the supporting post in the direction indicated below and attach the stand to the TV with the wider side of the base facing forward.

2

Long screws

1

Forward

3stand into the openings on the rear of the

Soft cushion

4Insert and tighten the 4 screws into the 4 holes on the rear of the stand unit.

Middle screws

51 Insert the stand cover.

2 Insert the screw to secure the stand cover.

Short screw

2

1

• To detach the stand, perform the steps in reverse order.

4Insert and tighten the 4 screws into the 4 holes on the rear of the stand unit.

Middle screws

51 Insert the stand cover.

2 Insert the 2 screws to secure the stand cover.

Short screws	2
1

• To detach the stand, perform the steps in reverse order.

8