Basic adjustment
Channel Settings
Auto Installation
Setup
Auto Installation
The TV automatically detects and stores all available services in your area. This function also allows you to perform the channel setting for digital and analogue individually and reconfigure the settings after the initial auto installation has been completed.
After selecting “Yes” on the screen, you can set language and channel search the same as in the initial auto installation. Follow steps 2, 5 and 6 on page 9.
NOTE
•PIN input is required when executing “Auto Installation”. The default PIN is “1234”. To change the PIN setting, refer to Password/Parental lock settings on page 28. To clear the PIN setting (PIN input will no longer be needed), refer to CLEARING THE PIN on page 40.
•You cannot set the Home/Store setting and the country setting in “Auto Installation” in the “Setup” menu. If you want to reconfigure those settings, automatically execute initial auto installation after executing “Reset” from the “Setup” menu.
•The current country setting is displayed on the screen.
Digital channel settings
Setup
Programme Setup
Digital Setting
You can reconfigure the DTV service settings automatically or manually.
NOTE
•PIN input is required when executing “Program Setup”. The default PIN is “1234”. To change the PIN setting, refer to Password/Parental lock settings on page 28. To clear the PIN setting (PIN input will no longer be needed), refer to CLEARING THE PIN on page 40.
E Additional Search
Use this menu to add new services automatically after auto installation has been completed.
E Manual Search
Add new services within a specified frequency band.
•Enter the frequency using
•You can perform “Manual Search” with a service number only when the five Nordic countries have been selected in the country setting.
E Manual Adjust
Configure various settings for each service using the Colour (R, G, B) buttons.
| Service | Service | Lock | CH | Old |
| No. | Name | Skip | LCN | |
|
| ||||
DTV | 993 | SIT 3 |
|
|
|
DTV | 994 | SIT 2 | ✔ |
|
|
DTV | 995 | SIT 1 |
| ✔ |
|
DTV | 999 | HD Monosco |
|
|
|
R : Lock | G : CH Skip | B : Sort |
|
| |
1Press a/b to select the desired service.
2Press the colour button on the remote control unit corresponding with the item you want to reconfigure.
•The ✔ mark indicates the operation is set to on. Each time the colour button is pressed, you can switch the corresponding operation on/off.
Buttons for Manual Adjust operation
Lock: Press R button.
When the service is locked, you must enter your PIN whenever you tune to the service.
CH Skip: Press G button.
Services with a ✔ mark are passed over when pressing Pr/s on the TV or remote control unit.
Sort: Press B button.
The item position of services can be sorted.
1Press a/b to select the service whose item position you want to move, and then press OK.
DTV | 994 | SIT 2 | ✔ |
|
|
|
|
DTV | 995 | SIT 1 | ✔ |
|
|
|
|
2Press a/b to move it to the desired position, and then press OK.
DTV | 994 | SIT 1 | ✔ |
|
|
|
|
DTV | 995 | SIT 2 | ✔ |
|
|
|
|
3Repeat steps 1 and 2 until all desired service items are sorted.
26