Initial auto installation

Sharp LC-40LE810E, LC-52LE820E, LC-46LE820E Initial auto installation, Digital broadcast setting

Quick guide

When the TV is powered on for the first time after purchase, the initial auto installation wizard appears. Follow the menus and make the necessary settings one after another.

Confirm the following before turning on the power

EIs the antenna cable connected? E Is the AC cord plugged in?

E Is the MAIN POWER switch turned on (;)?

1Press <Aon the TV.

• The initial auto installation wizard appears.

2Setting the OSD language.

Press a/b/c/dto select the desired language, and then press ;.

3Selecting the location of the TV.


	HOME		STORE

Press c/dto select where you will use this TV, and then press ;.

•The confirmation screen pops up only when selecting “STORE”. Press c/dto select “Yes” or “No”.

•HOME: “STANDARD” will be the default value for the “AV mode” setting.

•STORE: “DYNAMIC (Fixed)” will be the default value for the “AV mode” setting. If the “AV mode” is changed, the TV will automatically switch back to “DYNAMIC (Fixed)” when there is no signal input from the TV or remote control unit for 30 minutes.

•STORE: A demonstration image will be displayed after initial auto installation is completed. If you have chosen “STORE” by mistake, go to “Setup” > “View setting” > “Reset” > select “HOME” again.

4Setting the country.

Press a/b/c/dto select your country or area, and then press ;.

•This setting screen only appears during the first installation.

NOTE

•If you set “Sweden” in the country setting, you can select the cable provider “ComHem”. Refer to the Hmark in the following steps or instructions about the settings for “ComHem”.

5Starting channel search.


	Digital search		Analogue search

Press c/dto select “Digital search” or “Analogue search”, and then press ;.

•To watch both analogue broadcasts and digital broadcasts, you should perform the auto installation setting for each format (Page 30).

•If you want to search for more broadcasts, execute “Additional search” from the “Programme setup” menu (Pages 30_32).

NOTE

•If you turn off the power on the TV while performing a channel search, the initial auto installation wizard will not appear. The auto installation function allows you to execute the installation again from “Setup” > “View setting” (Page 30).

•The initial auto installation wizard will abort if you leave the TV unattended for 30 minutes before searching for channels.

•After initial auto installation is completed, the default PIN is automatically set to “1234”. To change the PIN setting, refer to Password/Lock settings (Page 33). To clear the PIN setting (PIN input will no longer be needed), refer to CLEARING THE PIN (Page 50).

•When “Italy” is selected in the country setting, the default age restriction value is set to 18.

Digital broadcast setting

Press c/dto select “Terrestrial” or “Cable”, and then press ;.


	Terrestrial		Cable

•When you set “Sweden” in the country setting and select “Cable” for the searching format, you can select the cable provider “ComHem”.

ESearching for terrestrial broadcasts

The TV searches for, sorts and stores all the receivable TV stations according to their settings and the connected antenna.

• To abort the initial auto installation in progress, press 6.

LC-52LE820E, LC-46LE820E, LC-40LE810E, LC-40LE820E, LC-46LE810E specifications

The Sharp LC-40LE820E, LC-46LE810E, LC-40LE810E, LC-46LE820E, and LC-52LE820E are a series of LCD televisions that embody advanced display technologies and a suite of features designed to enhance viewing experiences. These models are part of Sharp’s AQUOS lineup, known for its sleek design and high-quality visual performance.

Starting with the LC-40LE820E, this 40-inch model boasts a full HD resolution of 1920 x 1080 pixels, ensuring a crystal-clear picture that brings content to life. It features Sharp’s proprietary AQUOS LCD technology, which uses advanced pixel control for better image reproduction. The model supports a wide color gamut, allowing for vibrant colors and deeper blacks.

Transitioning to the LC-46LE810E and LC-40LE810E, both of these televisions support 1080p HD content as well and come with similar advancements in Sharp’s panel technologies. The LC-46LE810E, being a larger 46-inch variant, provides a more immersive experience that’s ideal for movie nights and gaming. One of the standout features is the built-in media player, allowing users to enjoy multimedia content directly from USB drives or other storage devices.

The LC-46LE820E takes this further, offering additional smart capabilities that make it not just a television but a hub for entertainment. With integrated internet connectivity, users can access various streaming services and online content seamlessly. The model is equipped with an intuitive interface, making navigation through smart features user-friendly.

Lastly, the LC-52LE820E is the flagship model in this series, featuring an expansive 52-inch display. It combines all the attributes found in the other models while incorporating enhanced sound technology for richer audio quality. This TV is designed for room-filling sound and supports multiple audio formats for varied content.

Overall, Sharp's LCD series offers a strong combination of sleek design, brilliant display technologies, and smart features, catering to a wide audience seeking quality and performance in their home entertainment solutions. With their full HD displays, smart connectivity options, and advanced audio technologies, these models provide excellent value for consumers looking to elevate their viewing experience.