Sharp LC-52LE820E, LC-46LE820E, LC-46LE810E Checking signal strength and channel strength DVB-T/C

Quick guide

Checking signal strength and channel strength (DVB-T/C)

If you install a DVB-T/C antenna for the first time or relocate it, you should adjust the alignment of the antenna to receive a good reception while checking the antenna setup screen.

1Go to “Menu” > “Setup” > “View setting” > “Channel settings” > “Antenna setup- DIGITAL”.

EChecking signal strength

2 Press a/bto select “Signal strength”, and

Channel strength of DVB-T

Supply voltage	Frequency	MHz
Signal strength
Channel strength	CH No.
	Signal strength

Current Max.

Quality

Current Max.

Channel strength of DVB-C

then press ;.

Supply voltage

Signal strength

Frequency	MHz
Symbol rate

Supply voltage

Signal strength

Channel strength

CH No. Signal strength

Current	Max.
Quality
Current	Max.

Channel strength

QAM modulation
Signal strength
Current		Max.
Quality
	Current	Max.

EChecking channel strength

3Press a/bto select “Channel strength”, and then press ;.

•You can input a specified frequency band using the 0_9 numeric buttons.

Supplying power to the antenna

4Position and align the antenna so that the maximum possible values for “Signal strength” and “Quality” are obtained.

NOTE

•The values of “Signal strength” and “Quality” indicate when to check the appropriate alignment of the antenna.

You must supply power to the antenna in order to receive digitally/terrestrially broadcast stations after connecting the antenna cable to the antenna terminal on the rear of the TV.

1� Press @and the “Menu” screen displays.

2� Press c/dto select “Setup”, and then press ;.

3� Press c/dto select “View setting”, and then press ;.

4� Press a/bto select “Channel settings”, and then press ;.

5� Press a/bto select “Antenna setup-DIGITAL”, and then press ;.

6� Press a/bto select “Supply voltage”, and then press ;.

7� Press c/dto select “On”, and then press ;.

13