Sharp LC-60C640U Color Temp Color Temperature, Motion Enhancement, Active Contrast, Black Level

On-Screen Display Menu

Color Temp.

(Color Temperature)

For a better white balance, use color temperature correction.

High: White with bluish tone

Mid-High:

Middle:

Mid-Low:

Low: White with reddish tone

White balance can be adjusted between a maximum of +30 and a minimum of –30 for each color temperature.

R Gain (LO/HI): –30 through +30

G Gain (LO/HI): –30 through +30

B Gain (LO/HI): –30 through +30

•For resetting all adjustment items to the factory preset values, press a/b to select "Reset", and then press

ENTER.

Motion Enhancement

Use Motion Enhancement to view fast-action video more clearly.

■LC-70LE640U/LC-60LE640U/LC-52LE640U

120Hz High/120Hz Low: For obtaining a clearer image.

Off: Normal image.

■LC-80LE633U/LC-70C6400U/LC-60C6400U/ LC-52C6400U

AquoMotion240: Turns the LED backlight on or off to display motion picture more smoothly and clearly.

120Hz High/120Hz Low: For obtaining a clearer image.

Off: Normal image.

•"Motion Enhancement" may cause image noise. If this occurs, turn the function "Off".

•When AV MODE is set to "GAME" or "PC", or PC format is being input, "Motion Enhancement" is not available.

Active Contrast

Automatically adjusts the image contrast according to the scene.

On: Automatically adjusts the image contrast.

Off: No adjustment.

Gamma Adjustment

Adjusts the differences of picture tones between bright parts and dark parts. The adjustment range of the gamma can be set to a maximum of +2 and a minimum of –2 by pressing c or d.

Black Level

Adjusts on-screen black level to your preferred level.

High: The black level gets brighter.

Low: The black level gets darker.

•"Black Level" is available for input signal from Composite Video, Component 480i and analog broadcasts (air and cable).

Film Mode (3:2 pull-down)

Automatically detects a fi lm-based source (originally encoded at 24 frames/second), analyzes it then recreates each still fi lm frame for high-defi nition picture quality.

Advanced: Adjust effect to reduce judder from fi lm contents. Select a desired level of judder reduction from 0 to +10.

Standard: Detects, analyzes, converts fi lm source.

Off: Normal viewing mode.

•"Film Mode" does not function depending on input signal type.

•"Film Mode" does not function when you set AV MODE to "GAME" or “PC”.

•"Standard" does not function when channel display shows an input signal resolution of 480p, 720p, or 1080p.

Digital Noise Reduction

Produces a clearer video image.

Auto: Automatically adjusts the level of noise reduction.

High/Middle/Low: Select a desired level for viewing a clearer video image.

Off: No adjustment.

•"Digital Noise Reduction" is not available when you set AV MODE to "PC" or PC format is being input.

•When AV MODE is set to "GAME", "Auto" is not available.

Monochrome

For viewing a video in monochrome.

On: For viewing in monochrome.

Off: Normal color.

Range of OPC

The brightness level range of the OPC sensor's automatic adjustments can be set according to your preferences. The adjustment range of the OPC sensor can be set to a maximum of +16 and a minimum of –16.

Max.: –15 through +16

Min.: –16 through +15

•The "Range of OPC" settings are active only when "OPC" is set to "On".

•The maximum setting cannot be set to a smaller number than the minimum setting.

•The minimum setting cannot be set to a bigger number than the maximum setting.

•Depending on the brightness of the surrounding light, the OPC sensor might not operate if the adjustment range is small.

27