Sharp LC-32LE600E, LC-40LE600E Preparation, Supplied accessories, Attaching the stand unit

Preparation

Supplied accessories

Remote control unit ( x 1)	AC cord ( x 1)	Cable clamp ( x 1)	Stand unit ( x 1)
			For 32 inch models
	Product shape varies in		For 40/46 inch models
	some countries.
Pages 3 and 6	Page 8	Page 8	Page 5

•Operation manual (This publication)

•“AAA” size zinc-carbon battery ( x 2) ... Page 6

Attaching the stand unit

•Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal.

•Before performing work, spread cushioning over the surface on which you will be laying the TV. This will prevent it from being damaged.

CAUTION

•Attach the stand in the correct direction.

•Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.

1Confirm that there are eight screws with the stand unit.

Models Screws

32 inch models

AB

40/46 inch models

CD

2Attach the supporting post for the

onto the base using the four screws with screw driver as shown.

Supporting post

*32 inch models: Use Screws B in the table in step 1.

*40/46 inch models: Use Screws D in the table in step 1.

3Inserting the stand.

1Insert the stand into the openings on the bottom of the TV (Hold the stand so it will not drop from the edge of the base area).

2Insert and tighten the four screws into the four on the rear of the TV.

Soft cushion

*32 inch models: Use Screws A in the table in step 1.

*40/46 inch models: Use Screws C in the table in step 1.

NOTE

•To detach the stand unit, perform the steps in reverse order.

•A screw driver is not supplied with this product.

5

LC-LE600E_GB3.indd 5

2009/07/14 14:37:43