Sharp LC-46LE600E Additional Search, Manual Search, Channel Skip, Channel Sort, Channel Edit

Basic adjustment

Additional Search

Use this menu to add new channels automatically after auto installation has been completed.

Manual Search

Add new services within a specified channel bandwidth.

NOTE

•You can search the channel bandwidth by pressing ;after

setting the value for both “From Channel” and “To Channel” using c/d.

•You can perform “Manual Search” with a service number only when the four Nordic countries (Sweden, Norway, Finland or Denmark) have been selected in the country setting (Page 9). When another country has been selected, “Manual Search” is not shown on the menu screen.

Channel Skip

Channels with a ✔ mark are passed over when pressing :r/s on the TV or remote control unit.

1Press a/bto select the desired channel.

2Press ;to set a ✔ mark at the channel that you want to skip.

Channel Sort

The item position of channels can be sorted.

1Press a/bto select the channel whose item

position you want to move, and then press

;.

Channel Number Channel Name Channel Sort

Channel Edit

This menu allows you to reconfigure some settings for the channel currently selected.

Label

When a TV channel sends its Network Name, the “Auto Installation” detects the information and assigns a name to it. However, you can change channel names individually.

1Press a/b/c/dto select each character of

the new name for the channel, and then press

;.

2Repeat step 1 above until the name is fully spelt out.

NOTE

•The name can be six characters or less.

•If a channel name is less than six characters, select “END” to set the channel name.

Frequency

You can adjust the frequency to the desired position (only for analogue channels).

NOTE

•Adjust while checking the background picture as a reference.

•You can set the frequency by pressing c/d. Each time you press cor d, the value is changed in increments of 0.05 MHz.

2	Press a/bto move it to the desired position,
	and then press ;.
	Channel Number	Channel Name	Channel Sort
3	Repeat steps 1 and 2 until all desired channel
	items are sorted.

Decoder

When connecting a decoder to the TV, you need to select channels that need to be decoded.

Channel Lock

When the channel is locked, you must enter your PIN whenever you tune to the channel.

NOTE

•See “Child Lock” for setting a PIN.

•When “Channel Lock” is set for a channel, “Child lock has been activated” displays, and the image and sound of the channel are blocked.

•When pressing 6 while “Child lock has been activated” displays, the PIN input window will display. Inputting the correct PIN unlocks the “Child Lock” temporarily until the power is turned off.

•In case you select “Italy” in the country setting (Page 9), the PIN input window displays every time you tune in to the channels with “Channel Lock” applied.

Colour System

Select the optimum colour system to receive (“Auto”, “PAL”, “SECAM”, “NTSC”) (only for analogue channels).

Sound System

Select the optimum sound systems (Broadcasting systems) to receive (“B/G”, “A2 B/G”, “D/K”, “A2 D/K”, “A2 D/K1”, “A2 D/K2”, “I”, “L”, “L’”) (only for analogue channels).

21

LC-LE600E_GB3.indd 21

2009/07/14 14:37:59