Sharp LC-37BD60U Preparation, Antennas, Installing Batteries in the Remote Control Unit

Page 10

Preparation

Antennas

To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm coaxial cable with an F-type connector, plug it into the antenna terminal at the rear of the TV set.

1.A 75-ohm system is generally a round cable with F-type connector that can easily be attached to a terminal without tools (Commercially available).

2.A 300-ohm system is a fl at “twin-lead” cable that can be attached to a 75-ohm terminal through a 300/75-ohm adapter (Commercially available).

F-type connector

75-ohm coaxial cable (round)

300-ohm twin-lead cable (fl at)

NOTICE F-type connector should be finger-tightened only.

When connecting the RF cable to the TV set, do not tighten F-type connector with tools.

If tools are used, it may cause damage to your TV set. (The breaking of internal circuit, etc.)

F-type connector

75-ohm coaxial cable

Connecting Antenna Cable

• Connect the antenna cable to the TV using one of the methods in the illustration as shown (1, 2, 3 or 4).

1Cable without a CATV converter

2VHF/UHF antenna

3Combination VHF/ UHF antenna

4Separate VHF/UHF antenna

 

 

 

Home Antenna

Cable TV lead-In

 

terminal (75-ohm)

 

 

 

 

 

 

 

Coaxial cable

 

 

 

 

(commercially available)

 

 

 

Home Antenna

75-ohm coaxial cable (round)

terminal (75-ohm)

 

 

 

 

 

 

Coaxial cable

 

 

 

 

(commercially available)

75-ohm coaxial cable (round)

 

 

 

 

or

300/75-ohm adapter

 

 

 

300-ohm twin-lead cable (flat)

(commercially available)

 

 

VHF

UHF

300-ohm

 

 

ANTENNA

ANTENNA

 

 

twin-lead cable

 

 

 

 

 

 

 

 

 

IN

OUT

 

300-ohm twin-lead cable

Combiner

 

 

 

 

 

 

(commercially available)

or

75-ohm coaxial cable

To TV antenna terminal

Installing Batteries in the Remote Control Unit

If the remote control fails to operate TV functions, replace the batteries in the remote control unit.

1Open the battery cover.

2Insert two “AAA” size batteries (supplied with the product).

3Close the battery cover.

•Place the batteries with their terminals corresponding to the (e) and (f) indications in the battery compartment.

CAUTION

Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.

•Do not mix batteries of different types. Different types of batteries have different characteristics.

•Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical leakage in old batteries.

•Remove batteries as soon as they are worn out. Chemicals that leak from batteries that come in contact with skin can cause a rash. If you fi nd any chemical leakage, wipe thoroughly with a cloth.

•The batteries supplied with this product may have a shorter life expectancy due to storage conditions.

•If you will not be using the remote control unit for an extended period of time, remove batteries from it.

8

Page 9 Page 11
Image 10
Page 9 Page 11
Contents LC-32BD60U LC-37BD60U Page LC-32BD60U LC-37BD60U Trademarks Declaration of ConformityAdditional Safety Information Dear Sharp CustomerPrecautions when transporting the TV Child Safety Supplied Accessories Attaching the StandUsing the Remote Control Unit Power indicator on the front of the television lights GreenClose the battery cover Installing Batteries in the Remote Control UnitConnecting Antenna Cable PreparationContents TV Side Part NamesTV Front Input buttonTV Side/Rear Remote Control Unit When using the remote control unit, point it at the TVWhen using composite cable Input Connecting to External EquipmentConnecting Audiovisual Equipment When using component cable Input 1 orConnecting a PC Using Digital Audio OutputConnecting Hdmi Equipment When connecting to a PC with an analog RGB terminal InputInitial Setup Turning On/Off the PowerWatching TV Direct Button Operation Changing VolumeSleep Timer Changing ChannelsExamples when receiving MTS and SAP MTS/SAP stereo modeDigital broadcasting audio mode Example when receiving Digital broadcastingClosed Captions and Digital Closed Captions Press Power SavingExample You can select the screen size Press View ModeFor PC input mode For 43 programsTypes of Discs that Can Be Used with This TV About DiscsBlu-ray Disc Discs that Cannot Be Used with This TVTitle, Chapter and Track Icons Used on DVD-VIDEO Disc CasesCopyright Disc PrecautionsWhen condensation forms To remove condensationRemoving a Disc Disc PlaybackLoading a Disc BD/DVD-VIDEO PlaybackBD/DVD Menus Using the Disc MenuUsing the Pop-up Menu Start Playback by Selecting a Title from Top MenuPlayback by Selecting a Playlist DVD-R/-RW/BD-RE/-R PlaybackVirtual Package Press Hto stop playbackAudio CD Playback Playback FunctionsPartial Repeat Playback Repeat Playback A Specified Part Repeat Playback of a Title or ChapterPress Disc Menu Displaying the Audio Information Switching SubtitlesSwitching the Angle Displaying the Angle MarkDisc Menu Control Settings During PlaybackDisc Menu Operation Procedure Disc Menu Which Can Be SetOn-Screen Display Menu For TV/Blu-ray/INPUT 1/2/3 ModeFor HDMI/PC-IN Mode Menu ItemsOn-Screen Display Menu Operation Using the remote controlUsing the control panel of the main unit Menu Operation ButtonsAdvanced Picture Setting OPC SettingPicture Menu Surround Audio MenuBass Enhancer No Signal Off Power Control MenuPower Saving Blu-ray disc EcologyCH Setup Setup MenuEZ Setup Input SkipPC Audio Select PC SetupPosition Hdmi Auto ViewParental Ctrl Parental Control Setting Audio SetupReset LanguageMpaa Voluntary movie rating system RatingCanadian French Ratings How to temporarily release the V-CHIP BlockCanadian English Ratings Reactivating the temporarily released V-CHIP BlockOption Menu Demo Mode Favorite CH Favorite Channel SettingSoftware Update Operation Lock OutAfter the screen shown below is displayed, press During the data checking, Checking blinksPress Enter to start updating Remove the USB memory deviceBlu-ray disc Setup Audio formats Next generationBitstream USB Memory Management Software UpdateVersion Press c/d to select Yes, and then pressEnter the 4-digit number by using Press Enter to start checking data in the USB memory device9CBL/SAT, DOT SAT Presetting Remote Control FunctionOther Viewing Options 13 a/b/c/d, EnterOther Viewing Options Manufacturer codes Using Aquos Link Controlling Hdmi Equipment Using Aquos LinkOne Touch Recording Aquos Link SetupAuto Power On Selecting RecorderOne Touch Playback Timer RecordingAquos Link Menu Press d to start playing back a titleSelecting Media Type for CEC-Compatible Recorder Playback of Titles Using Aquos LinkManually Changing Aquos Audio Speaker System’s Sound Mode Hdmi Device SelectionAppendix Setting the TV on the WallRemoving the Stand Error message about reception of broadcast TroubleshootingTroubleshooting-Digital Broadcasting Problem Possible SolutionTroubleshooting-Disc Playback Still image playback or frame RS-232C Port Specifications Model LC-32BD60U Model LC-37BD60U Optional AccessorySpecifications Part name Model numberPC Compatibility Chart Information on the Software License for This ProductCalling for Service Limited WarrantyPage Dimensional Drawings LC-37BD60USharp Electronics Corporation

LC-37BD60U specifications

The Sharp LC-37BD60U is a versatile and feature-rich LCD television that was designed to deliver high-quality entertainment experiences. With a sleek design and impressive specs, this model gained popularity among consumers seeking an affordable yet capable HD television.

One of the standout features of the LC-37BD60U is its 37-inch screen size, which strikes a balance between being compact enough for smaller spaces while still offering a large viewing area. The television boasts a native resolution of 1920 x 1080 pixels, making it a Full HD TV. This resolution allows for crisp, clear images with vibrant colors, enhancing the viewing experience for movies, sports, and video games.

The technology behind the LC-37BD60U includes Sharp's advanced LCD panel which incorporates a 120Hz refresh rate. This feature minimizes motion blur and improves the clarity of fast-moving images, making it ideal for action sequences and fast-paced gaming. Additionally, it supports a wide color gamut, delivering more lifelike images with shades that pop.

In terms of connectivity, the LC-37BD60U comes equipped with multiple HDMI inputs, enabling users to connect a variety of devices such as Blu-ray players, gaming consoles, and streaming devices. It also includes USB ports, allowing for the playback of multimedia files directly from compatible storage devices. The inclusion of a built-in tuner allows viewers to access over-the-air broadcasts with ease.

Audio performance is another important aspect of the LC-37BD60U, which features built-in speakers that deliver decent sound quality for everyday use. However, for audiophiles or those seeking a more immersive sound experience, the addition of an external sound system is recommended.

Energy efficiency is notable in the LC-37BD60U, with its Energy Star certification ensuring that it operates using less power than conventional models. This makes it an eco-friendly option that can help reduce electricity bills.

Overall, the Sharp LC-37BD60U is a practical choice for consumers seeking a reliable and feature-packed television. With its combination of Full HD resolution, advanced refresh rate technology, ample connectivity options, and energy efficiency, it offers a great value for both casual viewers and dedicated home theater enthusiasts.
Top Page Image Contents