Sharp LC-37BD60U operation manual Appendix, Removing the Stand, Setting the TV on the Wall

Page 55

Appendix

Removing the Stand

• Before detaching (or attaching) the stand, unplug the AC cord from the AC INPUT terminal.

CAUTION

• Do not remove the stand from the TV unless using an optional wall mount bracket to mount it.

Before attaching/detaching the stand

Before performing work, make sure to turn off the TV.

Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.

1

Screwdriver

2

Unfasten the four screws used to secure the stand in place.

Detach the stand from the TV. (Hold the stand so it will not drop from the edge of the base area.)

• To attach

in reverse order.

Setting the TV on the Wall

CAUTION

This TV should be mounted on the wall only with the wall mount bracket AN-37AG5 (SHARP). The use of other wall mount brackets may result in an unstable installation and may cause serious injuries.

Installing the TV requires special skill that should only be performed by qualified service personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting that results in accident or injury.

Using an optional bracket to mount the TV

You can ask a qualifi ed service professional about using an optional AN-37AG5 bracket to mount the TV on the wall.

Carefully read the instructions that come with the bracket before beginning work.

Hanging on the wall

AN-37AG5 wall mount bracket.

(See the bracket instructions for details.)

About setting the TV angle

LC-32BD60U

The center of the display: 1 15/32 inches (37 mm) above the “A” position.

LC-37BD60U

• The center of the display: 3/4 inch (19 mm) above the “A” position.

• Refer to the operation manual of AN- 37AG5 for details.

CAUTION

• Install the TV vertically on the wall. If the TV is installed at an angle, the Disc Drive may not operate normally.

Detach the cable clamp on the rear of the TV when using the optional mount bracket.

To use this TV mounted on a wall, remove the covers at the 4 locations on the rear of the TV, and then use the screws supplied with the wall mount bracket to secure the bracket to the rear of the TV.

53

Image 55
Contents LC-32BD60U LC-37BD60U Page LC-32BD60U LC-37BD60U Declaration of Conformity TrademarksDear Sharp Customer Additional Safety InformationPrecautions when transporting the TV Child Safety Attaching the Stand Supplied AccessoriesPower indicator on the front of the television lights Green Using the Remote Control UnitPreparation Installing Batteries in the Remote Control UnitConnecting Antenna Cable Close the battery coverContents Input button Part NamesTV Front TV SideTV Side/Rear When using the remote control unit, point it at the TV Remote Control UnitWhen using component cable Input 1 or Connecting to External EquipmentConnecting Audiovisual Equipment When using composite cable InputWhen connecting to a PC with an analog RGB terminal Input Using Digital Audio OutputConnecting Hdmi Equipment Connecting a PCInitial Setup Turning On/Off the PowerWatching TV Changing Channels Changing VolumeSleep Timer Direct Button OperationExample when receiving Digital broadcasting MTS/SAP stereo modeDigital broadcasting audio mode Examples when receiving MTS and SAPClosed Captions and Digital Closed Captions Press Power SavingExample For 43 programs Press View ModeFor PC input mode You can select the screen sizeDiscs that Cannot Be Used with This TV About DiscsBlu-ray Disc Types of Discs that Can Be Used with This TVIcons Used on DVD-VIDEO Disc Cases Title, Chapter and TrackTo remove condensation Disc PrecautionsWhen condensation forms CopyrightBD/DVD-VIDEO Playback Disc PlaybackLoading a Disc Removing a DiscStart Playback by Selecting a Title from Top Menu Using the Disc MenuUsing the Pop-up Menu BD/DVD MenusPress Hto stop playback DVD-R/-RW/BD-RE/-R PlaybackVirtual Package Playback by Selecting a PlaylistPlayback Functions Audio CD PlaybackPartial Repeat Playback Repeat Playback A Specified Part Repeat Playback of a Title or ChapterPress Disc Menu Displaying the Angle Mark Switching SubtitlesSwitching the Angle Displaying the Audio InformationDisc Menu Which Can Be Set Settings During PlaybackDisc Menu Operation Procedure Disc Menu ControlMenu Items For TV/Blu-ray/INPUT 1/2/3 ModeFor HDMI/PC-IN Mode On-Screen Display MenuMenu Operation Buttons Using the remote controlUsing the control panel of the main unit On-Screen Display Menu OperationAdvanced Picture Setting OPC SettingPicture Menu Surround Audio MenuBass Enhancer Blu-ray disc Ecology Power Control MenuPower Saving No Signal OffInput Skip Setup MenuEZ Setup CH SetupHdmi Auto View PC SetupPosition PC Audio SelectLanguage Audio SetupReset Parental Ctrl Parental Control SettingRating Mpaa Voluntary movie rating systemReactivating the temporarily released V-CHIP Block How to temporarily release the V-CHIP BlockCanadian English Ratings Canadian French RatingsOption Menu Operation Lock Out Favorite CH Favorite Channel SettingSoftware Update Demo ModeRemove the USB memory device During the data checking, Checking blinksPress Enter to start updating After the screen shown below is displayed, pressBlu-ray disc Setup Audio formats Next generationBitstream Press c/d to select Yes, and then press Software UpdateVersion USB Memory ManagementPress Enter to start checking data in the USB memory device Enter the 4-digit number by using13 a/b/c/d, Enter Presetting Remote Control FunctionOther Viewing Options 9CBL/SAT, DOT SATOther Viewing Options Manufacturer codes Controlling Hdmi Equipment Using Aquos Link Using Aquos LinkSelecting Recorder Aquos Link SetupAuto Power On One Touch RecordingPress d to start playing back a title Timer RecordingAquos Link Menu One Touch PlaybackHdmi Device Selection Playback of Titles Using Aquos LinkManually Changing Aquos Audio Speaker System’s Sound Mode Selecting Media Type for CEC-Compatible RecorderAppendix Setting the TV on the WallRemoving the Stand Problem Possible Solution TroubleshootingTroubleshooting-Digital Broadcasting Error message about reception of broadcastTroubleshooting-Disc Playback Still image playback or frame RS-232C Port Specifications Part name Model number Optional AccessorySpecifications Model LC-32BD60U Model LC-37BD60UInformation on the Software License for This Product PC Compatibility ChartLimited Warranty Calling for ServicePage LC-37BD60U Dimensional DrawingsSharp Electronics Corporation

LC-37BD60U specifications

The Sharp LC-37BD60U is a versatile and feature-rich LCD television that was designed to deliver high-quality entertainment experiences. With a sleek design and impressive specs, this model gained popularity among consumers seeking an affordable yet capable HD television.

One of the standout features of the LC-37BD60U is its 37-inch screen size, which strikes a balance between being compact enough for smaller spaces while still offering a large viewing area. The television boasts a native resolution of 1920 x 1080 pixels, making it a Full HD TV. This resolution allows for crisp, clear images with vibrant colors, enhancing the viewing experience for movies, sports, and video games.

The technology behind the LC-37BD60U includes Sharp's advanced LCD panel which incorporates a 120Hz refresh rate. This feature minimizes motion blur and improves the clarity of fast-moving images, making it ideal for action sequences and fast-paced gaming. Additionally, it supports a wide color gamut, delivering more lifelike images with shades that pop.

In terms of connectivity, the LC-37BD60U comes equipped with multiple HDMI inputs, enabling users to connect a variety of devices such as Blu-ray players, gaming consoles, and streaming devices. It also includes USB ports, allowing for the playback of multimedia files directly from compatible storage devices. The inclusion of a built-in tuner allows viewers to access over-the-air broadcasts with ease.

Audio performance is another important aspect of the LC-37BD60U, which features built-in speakers that deliver decent sound quality for everyday use. However, for audiophiles or those seeking a more immersive sound experience, the addition of an external sound system is recommended.

Energy efficiency is notable in the LC-37BD60U, with its Energy Star certification ensuring that it operates using less power than conventional models. This makes it an eco-friendly option that can help reduce electricity bills.

Overall, the Sharp LC-37BD60U is a practical choice for consumers seeking a reliable and feature-packed television. With its combination of Full HD resolution, advanced refresh rate technology, ample connectivity options, and energy efficiency, it offers a great value for both casual viewers and dedicated home theater enthusiasts.