Sharp LC-32SH7E, LC-42SH7E, LC-26SH7E Features, Change picture format, Analogue Ch Fine Tune

TV menu

• Frequency: Use digit buttons on the remote	4. Press OK to mark or cancel.
control to enter the frequency. (Only for	5. Follow the on-screen instructions to exit.
analogue channels).
• Colour System: Press ≤≥ to select the colour
system. (Only for analogue channels)	Features
• Sound System: Press ≤≥ to select the sound
system. (Only for analogue channels)	Change picture format
6. Follow the on-screen instructions to exit.

Change the picture format to suit your content.

NOTE

•The new channel number you have entered can not override the exist one.

Analogue Ch Fine Tune

You can manually fine tune analogue channels when reception is poor.

1.Press MENU / EXIT on the remote control and select TV ≥ Channels.

NOTE

•You are prompted to enter current password to enter Channels if Channel Block / Parental Guidance / Input Block in the Parental menu is not the default setting.

2.Press <> to select Analogue Ch Fine Tune and press OK or ≥ to enter the analogue channel list.

3.Press <> to select one channel and press OK to enter.

4.Press ≤≥ to adjust the frequency.

5.When complete, press OK to set the frequency. The fine tuned channel is stored under the current channel number.

6.Follow the on-screen instructions to exit.

Assign a channel decoder (For ATV)

Decoders that decode channels can be connected to SCART. You have to assign the TV channel as a channel to be decodered. Before selecting channels, make sure your TV is connected to SCART.

1.Press MENU / EXIT on the remote control and select TV ≥ Channels.

NOTE

•You are prompted to enter current password to enter Channels if Channel Block /Parental Guidance / Input Block in the Parental menu is not the default setting.

2.Press <> to select Decoder and press OK or ≥ to enter available analogue channel list.

3.Press <> to select the channel to decode.

1.Press ∏ repeatedly to select one of the following picture formats. Alternatively, press MENU / EXIT and select Features > Picture format.

P

Auto

The Automatic format for DTV transports streams with AFD information, while for ATV and SCART should be with WSS information.

Normal (Not for HD)

Displays the classic 4:3 format.

NOTE

•Constant use of the Normal picture format can cause screen distortion.

Zoom 1 (Not for HD)

Scales the classic 4:3 format to 14:9.

15