Sharp LC-42SH7E Automatically switch the TV off Off time, Change the time zone, Set the clock

TV menu

Zoom 2 (Not for HD)		4. Select Auto Synchronization and press ≤≥ to
	Scales the classic 4:3	select:
		• On: Sets the clock automatically the same with
	format to 16:9.
		the digital signal time. (Only if digital signal is
		available).
		• Off: Press <> to set your system Date or
		system Time manually by using the digit
		buttons on your remote control.

Wide

Stretches the classic 4:3 format to 16:9.

5.When the clock setting is completed, follow the on-screen instructions to exit.

Automatically switch the TV off (Off time)

Off time switches the TV to standby at a specified time.

NOTE

•Before using off time function, you have to set the time on your TV correctly. (See page 16 “Set the clock”)

NOTE

•When source input is PC mode, only Full screen and 4:3 are available.

•For 4:3 PC input signal, picture format 4:3 and Wide screen are available.

•For other input signals, only Wide screen is available.

Change the time zone

1.Press MENU / EXIT on your remote control and select Features > Time.

2.Press OK or ≥ to enter Time.

3.Select Time zone and press ≤≥ to select your time zone.

4.Follow the on-screen instructions to exit.

Set the clock

1.Press MENU / EXIT on the remote control and select Features ≥ Time.

2.Press OK or ≥ to enter Time menu.

3.Press <> to select Time and press OK or ≥ to enter.

Menu

Picture
		Auto Synchronization	Off
Sound		Date
			2009/10/10
		Time
			16: 52: 38
TV
		Timer	On
Features
		Off Time
			17: 52: 38
Parental
Eco
Select	EXIT Back

1.Press MENU / EXIT on the remote control and select Features ≥ Time.

2.Press OK or ≥ to enter Time menu.

3.Press <> to select Time and press OK or ≥ to enter.

4.Press > to select Timer and press ≤≥ to select:

•Off: Disable Timer.

•On: Press > to highlight the Off Time box and set and power off time by using the digit buttons on your remote control.

5.Follow the on-screen instructions to exit.

Automatically switch the TV to standby (Sleep timer)

Sleep timer switches the TV to standby after a defined period of time.

1.Press MENU / EXIT on the remote control and select Features ≥ Time.

2.Press OK or ≥ to enter Time.

3.Press <> to select Sleep Timer.

4.Press ≤≥ to select the period of time before TV enters to standby.

5.Follow the on-screen instructions to exit.

NOTE

•When you press any button on the remote control with less than three minutes left in the countdown, Sleep timer will be automatically canceled.

16