Menu operations
Manual Adjust
You can set some channel items manually.
MENU [Setup ... Programme Setup]
|
|
|
|
|
|
|
|
|
Fine | [179.25] |
|
|
|
|
|
|
|
Colour sys. | [AUTO] |
|
|
|
|
|
|
|
Sound sys. | [B/G] |
|
|
|
|
|
|
|
|
| 179.25 | MHz |
| ||||
Label | [SAT.1] |
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
Skip | [Off] |
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
Decoder | [Off] |
|
|
|
|
|
|
|
Lock | [Off] |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1
2
3 Press a/b to select “Programme Setup”, and then press OK.
If you have already set the PIN under “Child Lock”, enter it here.
• See page 16 for setting PIN.
2 Press a/b/c/dto select each character of the new name for the channel, and then press OK.
3 Repeat step 2 above until the name is fully spelt out.
•The name can be 5 characters or less.
•If a channel name is less than 5 characters, select “END”, then press OK.
Skip
Channels with “Skip” set to “On” are passed over when using Pr/Ps even if selected while watching the image from the TV.
Decoder
When connecting a decoder to the unit, you need to select EXT1.
NOTE
•“Off” is factory preset value.
Lock
4 Press a/b to select “Manual Adjust” and then press OK.
5 Press c/dto select “Yes”, and then press OK.
6 Press a/b/c/dto select the channel you want to edit, and then press OK.
• The selected channel information displays.
7 Press a/bto select the desired menu item, and then press OK.
8 Press a/b/c/dto select or adjust.
NOTE
•When you exit Programme Setup “Manual Adjust” menu, preset download automatically runs if you change information on that menu.
Fine
You can adjust the frequency to your desired position.
NOTE
•Adjust while checking the background picture as a reference.
•Instead of pressing c/dto adjust the frequency in step 8 above, you can set by directly entering the frequency number of the channel with
EXAMPLE
•179.25 MHz: Press 1 s7 s9 s2 s5.
•49.25 MHz: Press 4 s9 s2 s5 sOK.
Colour sys.
Select the optimum colour systems to receive. (AUTO, PAL, SECAM)
Sound sys. (Broadcasting system)
Select the optimum sound systems (Broadcasting systems) to receive. (B/G, D/K, I, L, L’)
Label
When a TV channel sends its Network Name, the Auto Installation detects the information and assigns a name to it. However, you can change individual channel names.
1 Repeat steps 1 to 7 in Manual Adjust.
You can block the viewing of any channel.
NOTE
•See page 16 for setting PIN.
•When Lock is set to “On” for a channel, “Child lock has been activated.” displays, and the image and sound of the channel are blocked.
•When pressing OK while “Child lock has been activated.” displays, PIN input menu will display. Inputting the correct PIN lifts the child lock temporarily until the power is turned off.
Sort
Channel positions can be sorted freely.
1
2
3 Press a/b/c/dto select the channel you want to move, and then press OK.
4 Press a/b/c/d to move it to the desired position, and then press OK.
5 Repeat steps 3 and 4 until all desired channels are sorted.
Erase Programme
An individual programme can be erased.
1
2
3 Press a/b/c/dto select the channel you want to erase, and then press OK.
• A message screen pops up.
4 Press c/dto select “Yes”, and then press OK to erase the selected programme. All the subsequent programmes move up.
5 Repeat steps 3 and 4 until all desired channels are erased.
15