TV menu
Automatically switch the TV to standby (Sleeptimer)
Sleeptimer switches the TV to standby after a defined period of time.
1.Press MENU.
2.Select Feature> Sleeptimer.
The Sleeptimer menu appears.
3.Press pπ to set the sleep time.
The Sleeptimer can be up to 180 minutes in steps of five minutes. If set to zero minutes, the Sleeptimer is switched off.
4.Press OK to activate the Sleeptimer.
The TV switches to standby after the pre- defined period of time.
NOTE
•You can always switch off your TV earlier or reset Sleeptimer during the countdown.
•When you press any button on the remote control with less than one minute left in the countdown, Sleeptimer will be automatically canceled.
Automatically switch the TV on (On timer)
On timer switches the TV to a specified channel at a specified time from standby.
1.Press MENU.
2.Select Features > On timer.
3.Press π to enter the On timer menu.
4.Press oœpπ to select Activate and set a frequency Daily, Once, or Off .
5.Press OK to confirm.
6.Press oœpπ to select Time and set the starting time.
7.Press Done to confirm.
8.Press oœpπ to select Programme no. and external source to set the channel.
9.Press OK to confirm.
10.Press MENU to exit.
NOTE
•Select On timer > Activate > Off to disable On timer.
•When On timer is Off, only Activate can be selected
•Set the TV clock before activating On timer feature.
Use TV lock
You can prevent your children from watching certain programmes or certain channels by locking the TV controls.
Set / change code
1.Press MENU.
2.Press oœpπ to select Features > Set code.
3.Press π to enter the code setup.
4.Enter your code using the Numeric buttons.
5.
If the code is set successfully, the dialogue box will disappear. However, if the code cannot be set, a new dialogue box will prompt you to
6.If you want to change the code, select Features > Change code
7.Enter your current code using the Numeric buttons.
If the code is validated, a new dialogue box will prompt you to enter your new code.
8.Enter the new code using the Numeric buttons.
A message appears prompting you to enter the new code again for confirmation.
NOTE
•If you forget your code, enter ‘8888’ to override any existing codes.
Lock or unlock all channels and connected devices.
1.Press MENU.
2.Press oœpπ to select Features > TV lock
3.Press π to enter the TV Lock
A screen appears prompting you to enter a code.
4.Enter your code using Numeric buttons.
5.Press oœ to select Lock or Unlock.
6.Press OK.
All channels and connected devices are locked or unlocked.
7.Press MENU to exit.
13