
TV menu
Manually install channels | Fine tune analogue channels |
| |
|
|
This section describes how to search and store analogue TV channels manually.
1.Press MENU.
2.Select Installation > Channel install. >
Analogue: Manual
The Analogue: Manual menu appears.
3.Press oœ to select the item you want to adjust.
• System
• Search
•
• Store cur. chan.
• Store new channel
• Skip channel
Step 1 Select your system
NOTE
•Skip this step if your system settings are correct.
1.Press MENU.
2.Select Installation > Channel install. >
Analogue: Manual
The Analogue: Manual menu appears.
3.Press oœpπ to select and enter System.
4.Press oœ to select your country or region.
5.Press OK to confirm.
6.Press MENU to exit.
Step 2 Search and store new TV channels
1.Press MENU.
2.Select Installation > Channel install. >
Analogue: Manual
The Analogue: Manual menu appears.
3.Press oœpπ to select and enter Search.
4.Press oœ or use Numeric buttons to manually enter the three digit frequency.
5.Press OK to begin search.
6.Press p when the new channel is found.
7.Press oœ to select Store new channel under a new channel number.
8.Press π to enter Store new channel.
9.Press pπ to select Yes and press OK to store the new channel.
10.Press MENU to exit.
You can manually fine tune analogue channels when reception is poor.
1.Press MENU.
2.Select Installation > Channel install. >
Analogue: Manual
The Analogue: Manual menu appears.
3.Press oœpπ to select and enter
4.Press oœ to adjust frequency.
5.Press OK when done.
6.Press oœ to select Store cur. chan. to store channel number.
7.Press π to enter Store cur.chan..
8.Press pπ to select Yes and press OK to store the current channel.
9.Press MENU to exit.
Skip channels
1.Press MENU.
2.Select Installation > Channel install. >
Analogue: Manual
The Analogue: Manual menu appears.
3.Press oœ to select and enter Skip channel.
4.Press pπ to select Yes and press OK to skip the channel you are currently watching.
The selected channel is skipped when you press P +/- on your remote control or view the channel list.
5.Press MENU to exit.
NOTE
•You can restore a skipped channel to your channel listing (see ‘Step 2 Search and store new TV channels’).
Rename channels
Channels can be renamed so that a name of your choice appears whenever the channel is selected.
1.When watching TV, press PR LIST to display the channel list.
2.Select the channel you want to rename.
3.Press π.
The channel options menu appears.
4.Press oœpπ to select and enter Rename chan..
A text input box appears.
5.Press oœpπ to select characters.
16