•To cancel an already set recording, highlight that programme and press the OK button and select the option “Delete Rec. Timer”. The recording will be cancelled.
Note: You cannot switch to any other channel or source while there is an active recording on the current channel.
Set Timer / Delete Timer
After you have selected a programme in EPG menu, press the OK button and and Options screen will be displayed. Select “Set Timer on Event” option and press OK button. You can set a timer for future programmes.
To cancel an already set reminder, highlight that programme and press the OK button. Then select “Delete Timer” option. The timer will be cancelled.
Note: It is not possible to record or set timer for two or more individual events at the same time interval.
First Time Installation
IMPORTANT: Ensure that the aerial is connected and a Common Interface module is not inserted before switching on the TV for the first time installation.
Do not insert a common interface module during the search process.
•When the TV is operated for the rst time, installation wizard will guide you through the process. First, language selection screen will be displayed:
•Use “
” or “
” buttons to select your language and press OK button to set selected language and continue.
•After selecting your language, you will be required to make the following settings: Country, Teletext
Language, Scan Encrypted, Active antenna and Store Mode options.
Note:
Active antenna should normally be turned off for most UK households.
Store Mode is for use in the retail environment and should normally be set to off for home use.
•By pressing “
” or “
” button, select the Country you want to set and press “
” button to highlight Teletext Language option. Use “
” or “
” button to select desired Teletext Language.
•Press “
” button after setting Teletext Language option. Scan Encrypted will be then highlighted. You can set Scan Encrypted as Yes if you want to scan coded stations. After selecting the Scan Encrypted, select Active antenna feature by pressing “
” or “
” button. Use “
” or “
” button to set active antenna mode as on or off. If an active antenna is connected to your TV, you can select this option as On (5V). Antenna power should be Off when standard antenna is used instead of the active antenna.
•You can activate Store mode option by using “
” or “
” button. If the Store mode is set to “enabled”, Store mode option will be available in other settings menu. If it is set to “disabled”, Store mode will not be available after the First Time Installation.
•Press OK button on the remote control to continue and the following message will be displayed on the screen:
To continue please select YES and press OK. To cancel operation, select NO and press OK.
English - 19 -