Menu operations
Power Control menu
MENU [Power Control]
Audio | Power Control |
No Signal Off | [Disable] |
No Operation Off | [Disable] |
|
|
No Signal Off
Menu Operation: A (page 9)
When set to “Enable”, the power will automatically shut down if no signal inputs for 15 minutes.
•Five minutes before the power shuts down, remaining time displays every minute.
NOTE
•When a TV programme finishes, this function may not operate.
No Operation Off
Menu Operation: A (page 9)
When set to “Enable”, the power will automatically shut down if there is no operation for 3 hours.
•Five minutes before the power shuts down, remaining time displays every minute.
Setup menu
MENU [Setup]
Setup | Option |
Auto Installation |
|
Programme Setup |
|
Child Lock |
|
Position |
|
WSS | [On] |
4:3 Mode | [Panorama] |
Rotate | [Normal] |
Language | [English] |
|
|
Auto Installation
You can run Auto Installation again, even after setting up the preset channels.
1
2
3 Press a/bto select “Auto Installation”, and then press OK.
If you already set the PIN, enter it here.
• See page 14 for setting PIN.
4 Press c/dto select “Yes”, and then press OK.
5 You can set language and country the same as in the initial auto installation. Follow steps 1 and 2 on page 8. After this setting, auto search starts with the following order.
1Programme auto search
2Auto labelling
3Auto sorting
4Preset download
You do not need to do anything during the auto search.
Programme Setup
You can run the Auto Installation procedure again at any time, by accessing the Setup menu, then Programme Setup. Channels can be tuned automatically or manually.
1
2
3 Press a/b to select “Programme Setup”, and then press OK.
If you already set the PIN, enter it here.
• See page 14 for setting PIN.
4 Press a/b to select “Auto Search”, “Manual Adjust”, “Sort” or “Erase Programme”, and then press OK.
Auto Search |
|
Manual Adjust |
|
Sort |
|
Erase Programme |
|
Yes | No |
Auto Search
You can automatically search for and download TV channels by performing the procedure below. This is the same function as from programme auto search to preset download in Auto Installation.
1 Repeat steps 1 to 4 in Programme Setup.
2 Press c/dto select “Yes”, and then press OK.
1Programme auto search
2Auto labelling
3Auto sorting
4Preset download
NOTE
• See page 8 for details.
12