Menu operations
Input Select
Menu Operation: A (page 9)
For setting the signal type of external equipment.
Input source | Signal type |
EXT 1 | Y/C, CVBS, RGB |
|
|
EXT 2 | Y/C, CVBS, RGB |
|
|
EXT 3 | AUTO, COMPONENT (Y, PB, PR), |
| |
|
|
NOTE
•If no (colour) image displays, try to change the other signal type.
•Check the operation manual of the external equipment for the signal type.
•EXT4 is not displayed in Input Select.
Useful features
WIDE MODE
You can select the picture size. Selectable picture size varies with the type of signal received.
Item (for SD (Standard) signal)
Normal: For 4:3 “standard” pictures. A side bar appears on each side.
Zoom 14:9: For 14:9 letterbox pictures. A thin side bar appears on each side, and you may see bars on the top and bottom with some programmes.
Panorama: In this mode the picture is progressively stretched toward each side of the screen.
Full: For 16:9 squeeze pictures.
Cinema 16:9: For 16:9 letterbox pictures. Bars may appear on the top and bottom with some programmes.
Cinema 14:9: For 14:9 letterbox pictures. Bars may appear on the top and bottom with some programmes.
Quick Shoot
Menu Operation: A (page 9)
Improve LCD response when viewing
NOTE
•Quick Shoot may cause image noise. If this occurs, turn the function “Off”.
Colour System
Menu Operation: A (page 9)
You can change the colour system to one that is compatible with the image on the screen. (AUTO, PAL, SECAM, NTSC 3.58, NTSC 4.43,
NOTE
•Factory preset value is “AUTO”.
•If “AUTO” is selected, colour system for each channel is automatically set. If an image does not display clearly, select another colour system (e.g. PAL, NTSC 4.43).
•“NTSC 3.58” cannot be selected in TV tuner mode.
Demo
Demo shows some of the functions of the TV on the screen.
The demonstration items are as follows.
•Setting Demo to “On” or “Off”.
•Selecting Input Source to use for Demo. (Demo, Skip [TV, EXT1, EXT2, EXT3, EXT4])
•Selecting Freeze setting for Demo. (On/Off)
•Selecting Menu setting for Demo. (On/Off)
•Selecting Teletext setting for Demo. (On/Off)
•Selecting Interval setting for Demo. (10 Sec., 15 Sec., 30 Sec.)
•The demo show can be activated from the option menu. After switching on this demo function, it takes 70 seconds approximately, before the
Item (for HD (High-Definition) signal)
Full: Display with the Overscan image. Crop all sides of screen.
Underscan 1: Display with the Underscan image. Bars appear on the top and bottom of screen.
Underscan 2: Display with the Underscan image. No bars appear on all sides of screen.
Manual Selection
1 Press f.
•The WIDE MODE menu displays.
•The menu lists the wide mode options selectable for the type of video signal currently received.
2 Press f or a/bwhile the WIDE MODE menu displays on the screen.
•As you toggle down the options, each is immediately reflected on the screen. No need to press OK.
Auto Selection
If you set WSS and 4:3 Mode in the Setup menu on pages 14 and 15, the optimum WIDE MODE is automatically chosen for every broadcast, VCR or DVD containing the WSS information.
WSS menu
To enable Auto Selection, set WSS in the Setup menu to “On”. (See page 14.)
4:3 Mode menu
To set the type of the wide screen, select “Normal” or “Panorama” in the 4:3 Mode menu. (See page 15.)
4:3 Mode set to “Normal” | 4:3 Mode set to “Panorama” |
NOTE
•If the signal contains no WSS information, Auto Selection will not function even when the WSS option is enabled.
16