Viewing remote control
TV
NOTE: The Remote Control range is approximately 7m / 23ft.
Using My button 1 (*)
Press MY BUTTON 1 for five seconds when on a desired source, channel or link, until the “MY BUTTON IS SET” message is displayed on the screen. This confirms that the selected MY BUTTON is now associated with the selected function.
Using My Button 2 (**)
Press MY BUTTON 2 for five seconds when on a desired source, channel or link, until the “MY BUTTON IS SET” message is displayed on the screen. This confirms that the selected MY BUTTON is now associated with the selected function.
1.Standby / On
2.Channel list
3.Volume
4.Menu on/off
5.OK / Confirm
6.Return / Back
7.No Function
8.My button 1 (*)
9.My button 2 (**)
10.Coloured buttons (Red, Green, Yellow, Blue)
11.
12.Fast rewind (in media browser mode)
13.Pause (in media browser mode) / Timeshift recording
14.Programme recording
15.Play (in media browser mode)
16.Stop (in media browser mode)
17.Fast forward (in media browser mode)
18.Subtitle
19.Image size
20.Teletext - Mix
21.Media Browser
22.Electronic programme guide
23.Exit
24.Navigation buttons
25.Quick menu
26.Info / Reveal (in TXT mode)
27.Programme up/down
28.Mute
29.Previous programme / Now (in EPG mode)
30.Numeric buttons
31.AV / Source
Teletext
Press “
” button to enter. Press again to activate mix mode. Press once more to exit. Follow the instructions displayed on digital teletext screen.
Digital Teletext (for UK only)
Press “
” button to view digital teletext information. Operate it with the coloured buttons, cursor buttons and the OK button. The operation method may differ depending on the contents of the digital teletext. Follow the instructions displayed on the digital teletext screen. When the “
” button is pressed again, the TV returns to television broadcast.