Sharp LC-22LE250E operation manual Picture Menu Contents, Advanced Settings

TV Menu Features and Functions

Picture Menu Contents

Mode	You can change the picture mode to suit your preference or requirements. Picture mode can
	be set to one of these options: Cinema,Game,Sport,Dynamic and Natural.
Contrast	Sets the lightness and darkness values of the screen.
Brightness	Sets the brightness value for the screen.
Sharpness	Sets the sharpness value for the objects displayed on the screen.
Colour	Sets the colour value, adjusting the colors.
Power Save	To set the Power Save Mode as Eco, Picture Off and Disabled.
Mode	(When the Mode is Dynamic, Power Save mode is automatically set as disabled.)
Backlight	This setting controls the backlight level. The backlight function will be inactive if the Power
	Save Mode is set to Eco. The backlight cannot be activated in VGA, Media Browser mode
(Optional)
	or while the picture mode is set to Game.
Noise	If the broadcast signal is weak and the picture is noisy, use the Noise Reduction setting
Reduction	to reduce the amount of noise.
Advanced Settings
Dyanmic	You can change the Dynamic Contrast ratio to desired value.
Contrast
Colour Temp	Sets the desired colour tone.
Picture Zoom	Sets the desired picture size from picture zoom menu.
	Note: Auto (Only available in Scart mode with SCART PIN8 high voltage/low voltage switching)
HDMI True	While watching from HDMI source, this feature will be visible in the Picture Settings
Black	menu. You can use this feature to enhance blackness in the picture.
Film Mode	Films are recorded at a different number of frames per second to normal television
	programmes. Turn this feature on when you are watching films to see the fast
	motion scenes clearly.
Skin Tone	Skin tone can be changed between -5 and 5.
Colour Shift	Adjust the desired colour tone.
RGB Gain	You can configure the colour temperature values using the RGB Gain feature.
Reset	Resets the picture settings to factory default settings.(Except Game Mode)
Autoposition	Automatically optimizes the display. Press OK to optimize.
(in PC mode)
H Position (in	This item shifts the image horizontally to the right hand side or left hand side of the screen.
PC mode)
V Position (in	This item shifts the image vertically towards the top or bottom of the screen.
PC mode)
Dot Clock (in	Dot Clock adjustments correct the interference that appear as vertical banding in dot
PC mode)	intensive presentations like spreadsheets or paragraphs or text in smaller fonts.
Phase (in PC	Depending on the resolution and scan frequency that you input to the TV set, you may
	see a hazy or noisy picture on the screen. In such a case you can use this item to get
mode)
	a clear picture by trial and error method.

While in VGA (PC) mode, some items in Picture menu will be unavailable. Instead, VGA mode settings will be added to the Picture Settings while in PC mode.

English - 15 -