Sharp LC 19SK25U, LC-19SK25U-W Simple button operations for changing channels, Method

Watching TV

Simple button operations for changing channels

You can change channels in several ways.

Method 1

Using CH r/s on the remote control unit, on the kitchen remote control unit or on the TV.

Method 2

1Press FLASHBACK to switch to the previously tuned channel.

2Press FLASHBACK again to switch back to the currently tuned channel.

•FLASHBACK will not work if no channel has been changed after the TV is turned on.

Method 3

Using remote control buttons 0-9, • (DOT) to select channels for VHF/UHF/CATV/DIGITAL.

To select a 1 or 2-digit channel number (e. g., Channel 5):

Press 5sENT

•When selecting a 1-digit channel number, it is not necessary to press 0 before the number.

•When you enter 0-9only, channel selection will be made if there is no operation within a few seconds.

To select a 3-digit channel number (e. g., Channel 115):

Press 1s1s5sENT

To select a 4-digit channel number (e. g., Channel 22.1):

Press 2 s2s • (DOT) s1sENT

•When you enter 0–9only, channel selection will be made if there is no operation within a few seconds.

•If you push “0” by itself, nothing will happen.

•Complete the above steps within a few seconds.

•When you enter 0–9and • (DOT), channel selection will be made if there is no operation within a few seconds.

Displaying the receiving channel information

Press DISPLAY once. The display appears

1 as shown on below. If the viewing channel is a digital channel, the information of channel number, audio service type, broadcast station, program information and V-Chip rating will appear.

	AIR	DIGITAL
	2.1
	AUDIO	STEREO
			SAP ( ST )
			1/4 CC1
			Ratings
(While viewing digital			(While viewing analog
channel)			channel)

Press DISPLAY again to return to normal

2 screen.

•The channel information will disappear if there is no operation within a few seconds.

19